Speakers - HP ENVY x360 15m Maintenance And Service Manual

4. Remove the battery (4).
Reverse this procedure to install the battery.

Speakers

To remove the speakers, use this procedure and illustration.
Table 5-3 Speaker description and part number
Description
Speakers (include left and right speakers and cables and four rubber isolators)
Before removing the speakers, follow these steps:
1. Prepare the computer for disassembly (see
2. Remove the bottom cover (see
3. Disconnect the battery cable from the system board (see
Remove the speakers:
1. Disconnect the speaker cable (1) from the system board.
2. Release the speaker cable from the retention clips (2) built into the front edge of the top cover/keyboard.
3. Remove the speakers (3) .
When removing the speakers, make note of the location of the four rubber isolator locations (4). The
absence of or damage to these isolators can result in degraded speaker performance.
32 Chapter 5 Removal and replacement procedures for authorized service provider parts
Preparation for disassembly on page
Bottom cover on page 29).
29).
Battery on page 31).
Spare part number
M45468-001