Battery - HP ENVY x360 15m Maintenance And Service Manual

7. Remove the bottom cover (3).
Reverse this procedure to install the bottom cover.

Battery

To remove the touchpad cable, use this procedure and illustration.
Table 5-2 Battery description and part number
Description
Battery (3 cell, 51 Whr, 4.45 AHr, Li, includes cable)
Before removing the battery, follow these steps:
1. Prepare the computer for disassembly (see
2. Remove the bottom cover (see
Remove the battery:
1. Disconnect the battery cable (1) from the system board.
2. Release the speaker cable from the retention clips (2) built into the front edge of the battery.
3. Remove the five Phillips M2.0 × 3.2 screws (2) that secure the battery to the computer.
Preparation for disassembly on page
Bottom cover on page 29).
Spare part number
L77034-005
29).
Battery 31