Power Connector Cable; Keyboard With Top Cover - HP 17-cn0 Series Maintenance And Service Manual

Reverse this procedure to reassemble and replace the display assembly.

Power connector cable

To remove the power connector cable, use this procedure and illustration.
Table 5-14 Power connector cable description and part number
Description
Power connector cable
Before removing the power connector cable, follow these steps:
1. Prepare the computer for disassembly (see
2. Remove the bottom cover (see
3. Remove the battery (see
4. Remove the display (see
Remove the power connector cable:
1. Disconnect the power connector cable from the system board (1).
2. Use a tool to release the power connector from the computer (2).
Reverse this procedure to install the power connector cable.

Keyboard with top cover

The top cover with keyboard remains after removing all other spare parts from the computer. In this section,
the first table provides the main spare part number for the top cover/keyboards. The second table provides
the country codes.
Preparation for disassembly on page
Bottom cover and rubber feet on page
Battery on page 34).
Display assembly on page
32).
51).
Component replacement procedures
Spare part number
M50400-001
32).
59