HP 17-cn0 Series Maintenance And Service Manual page 63

b. Rotate the display panel over and place it next to the display rear cover (4).
Display panels are available as the following spare part numbers:
M50439-001: HD, antiglare panel
M50440-001: HD, BrightView panel
M50441-001: HD, BrightView, touch-on panel (TOP)
M50442-001: FHD, antiglare panel
c. Lift the tape from the connector on the display panel (1), rotate the locking lever (2), and then
disconnect the cable from the panel (3).
10. If you need to remove the hinges from the display rear cover:
a. Remove the three Phillips M2.5 × 2.5 screws (1) from each hinge.
b. Remove the Phillips M2.5 × 4.0 screw (2) from each hinge.
c. Remove the hinges from the display back cover (3).
The hinges are available in the Hinge Kit as spare part number M50409-001 for nontouch models and
M50410-001 for touch screen models.
Component replacement procedures 55