Fingerprint Reader - HP 17-cn0 Series Maintenance And Service Manual

Table 5-6 hard drive description and part number
Description
2 TB, 5400 rpm
1 TB, 5400 rpm
Before removing the hard drive, follow these steps:
1. Prepare the computer for disassembly (see
2. Remove the bottom cover (see
3. Remove the battery (see
Remove the hard drive:
1. Lift the hard drive assembly out of the computer (1).
2. Disconnect the hard drive cable from the ZIF connector on the system board (2).
Reverse this procedure to install the hard drive.

Fingerprint reader

To remove the fingerprint reader, use this procedure and illustration.
Table 5-7 Fingerprint reader description and part number
Description
Fingerprint reader, starry blue
Fingerprint reader, natural silver
Fingerprint reader, snowflake white
Fingerprint reader, opulent aubergine
40 Chapter 5 Removal and replacement procedures for authorized service provider parts
Preparation for disassembly on page
Bottom cover and rubber feet on page
Battery on page 34).
Spare part number
912487-855
L30422-001
32).
32).
Spare part number
M50418-001
M50419-001
M50420-001
M59356-001