Page 1
Heavy-Duty Drywall Dolly Cart Owner’s Manual WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions may result in serious personal injury. Item #52880 SAVE THESE INSTRUCTIONS...
Page 2
Thank you very much for choosing a Strongway™ product! For future reference, please complete the owner’s record below: Serial Number/Lot Date Code: ________________________________ Purchase Date: ____________________________________________ Save the receipt, warranty, and this manual. It is important that you read the entire manual to become familiar with this product before you begin using it.
Table of Contents Intended Use ............................4 Technical Specifications ........................4 Important Safety Information ....................... 4 Specific Operation Warnings ....................... 5 Assembly Instructions .......................... 5 Operating Instructions .......................... 7 Maintenance ............................8 Parts Diagram ............................8 Parts List ..............................8 Replacement Parts ..........................
Intended Use This Strongway Heavy-Duty Drywall Dolly Cart is made from welded 1inch steel tubing for durability. The stepped 14-gauge steel plate bed provides stability for 8 inch rubber casters (2 rigid and 2 swivel). ¾ Overall dimensions are 49 inches (L) x 22 inches (W) x 46 ½...
• Keep children and bystanders away from the work area while operating the cart. Do not allow children to handle the cart. ⚠WARNING PERSONAL SAFETY • Stay alert, watch what you are doing, and use common sense when operating the cart. Do not use the cart while you are tired or under the influence of drugs, alcohol, or medication.
Page 6
Step 1 Assemble swivel casters(#6) and rigid casters(#7) to the platform(#1) with M10 bolts(#8)、M10 nuts(#9) and M10 flat(#10)/spring washers(#11). Figure 1 Step 2 Connect Elbow 1 with handle holder(#2)、Support Tube(#3)、Elbow 2(#4) and Connecting Tube(#5) with M8 bolts(#12)、M8 nuts(#13) and M8 flat washers(#14). Figure 2 Step 3 Insert the handle assembly into the holes on the platform (#1), and secure with M8 bolts(#12)、M8...
Figure 3 Make sure all hardware is tightened, then the drywall cart is ready for your use. Operating Instructions 1: Place the drywall dolly on the floor evenly. 2: Put the object onto the middle of the body of the drywall cart, and then push the frame slightly. Page 7 of 11...
Maintenance Maintain the product by adopting a program of conscientious repair and maintenance in accordance with the following recommended procedures. It is recommended that the general condition of any tool be examined before it is used. Keep your tool in good repair. Keep all cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier to control.
Northern Tool and Equipment Company, Inc. ("We'' or '"Us'') warrants to the original purchaser only ("You'' or “Your”) that the Strongway product purchased will be free from material defects in both materials and workmanship, normal wear and tear excepted, for a period of one year from date of purchase.
Page 11
Distributed by: Northern Tool & Equipment Company, Inc. Burnsville, Minnesota 55306 www.northerntool.com Made in China Page 11 of 11...