Display Assembly - HP Pavilion 15 Maintenance And Service Manual

5. Remove the power connector cable from the computer (5).
Reverse this procedure to install the power connector cable.

Display assembly

To remove and disassemble the display assembly, use these procedures and illustrations.
NOTE: The display assembly is spared at the subcomponent level. For display assembly spare part
information, see the individual removal subsections.
Before removing the display panel, follow these steps:
1. Prepare the computer for disassembly
2. Remove the bottom cover
3. Remove the battery (see
4. Remove the WLAN module (see
Remove the display assembly:
1. Disconnect the display cable from the system board ZIF connector (1).
2. Disconnect the WLAN antenna cables (2) from the terminals on the WLAN module.
NOTE:
WLAN antenna cable connects to the WLAN module #1 Main terminal. The #2 black WLAN antenna cable
connects to the WLAN module #1 Aux terminal.
46 Chapter 5 Removal and replacement procedures for authorized service provider parts
(Bottom cover on page
Battery on page
WLAN module on page
Models have either one or two WLAN antennas. On models with two antennas, the #1 white
(Preparation for disassembly on page
27).
29).
30).
27).