Table 5-6
USB board description and part number
Description
USB board
USB board cable
Before removing the USB board, follow these steps:
1.
Prepare the computer for disassembly
2.
Remove the bottom cover
3.
Remove the battery (see
Remove the USB board:
1.
Disconnect the cable from the ZIF connector on the USB board (1).
2.
Remove the three Phillips M2.0 × 2.0 screws (2) that secure the board to the computer.
3.
Remove the board from the computer (3).
Reverse this procedure to install the USB board.
Speakers
To remove the speakers, use this procedure and illustration.
Table 5-7
Speaker description and part number
Description
Speaker Kit
(Preparation for disassembly on page
(Bottom cover on page
Battery on page
29).
27).
Component replacement procedures
Spare part number
M16335-001
M08870-001
27).
Spare part number
M08943-001
35