Page 1
PENTAX O-FC1 User Guide [Operation] This guide explains how to make use of remote control functions with our cameras that are compatible with this memory card. • For details on how to insert the memory card into a camera and establish a wireless LAN connection with a communication device, refer to the “User Guide [Setup]”...
Displays the menu screen. Menu Screen Displays the [Image View] screen. Drive Mode Select a function from the menu Exposure Mode screen that appears in the Focus Method browser. Switches Live View on and off. Instant Review window Shutter speed/Aperture/EV Compensation/Sensitivity * Options underlined in blue can be changed.
Page 3
Shooting Images Check the Live View image on the Set the capture functions on the camera. communication device. Connect the memory card to the communication device via wireless LAN. For information on how to establish a connection, refer to the “User Guide [Setup]”. Start the browser on the communication device and display the menu screen.
Page 4
Tap M to return the settings Change the shutter to their default values. speed, aperture value, exposure compensation value and sensitivity as necessary. When the camera is in AF mode, tap the Tap the options underlined in focusing point in the Live View image. blue and select a value from Autofocusing is performed at the tapped point.
Page 5
u Caution • Remote Capture cannot be used when the camera is used in the following conditions. • When a drive mode other than Single Frame Shooting is • During Movie mode • While adjusting a composition (Composition Adjustment) • During the USB/HDMI connection...
List Display Image View Displays the images saved on the memory card on the communication device. Tap [Image View] in the menu screen. Or, tap B in the [Remote Capture] screen. The [Image View] screen appears. Switches between List Display and Folder Display. Tap a folder name to view a list of the images stored in the folder.
Checking the Image Information Saving an Image Tap the thumbnail to display the Touch and hold an image to save image. the image to the communication Tap 1 to return to the [Image device. View] screen. t Memo u Caution •...
Page 8
Information Settings Tap [Information]. In the menu screen, tap [Settings]. Communication Info and Version The [Settings] screen Info can be checked. appears. Tap 1 to return to the previous screen. The following settings can be made.
t Memo Communication Settings • For security reasons, it is recommended that the memory card be used after changing the SSID and Network Key. Tap [Communication Settings]. • The changed SSID and Network Key can be reset to the default settings using the [Wireless Memory Card] setting of the camera.
Camera Settings Language Tap [Camera Settings]. Tap [Language]. Select the image quality for Live Select either Japanese or View. English.
Page 11
Using with an Unsupported Camera Tap [Settings]. The [Settings] screen A camera incompatible with this memory card does not have appears. functions for turning the wireless LAN function on or off, or for resetting the communication settings. Therefore, this memory card cannot be controlled from the camera side.
Page 12
Turning the Wireless LAN Function Off Turn the camera off and on again, and then establish a wireless LAN connection again. As the default setting, this memory card’s wireless LAN function The control images shown below are created on the is set to on.
Page 13
Turning the Wireless LAN Function On Tap 2 and then [OK]. The setting is changed. If the wireless LAN function is set to off in the [Communication Settings] screen, the setting cannot be changed on the communication device. To change the setting, perform the following procedure on the camera side.
Page 14
t Memo Resetting the Communication Settings • If the camera is turned off and on again when [Auto Wi-Fi When the [SSID] and [Network Key] settings of [Communication Startup] is set to [off], the Settings] are changed, the changed settings can be returned to wireless LAN function is turned their default settings using the control image.
Page 15
Trademarks ® ® • Trek and FluCard are trademarks or registered trademarks of Trek Group of Companies in Singapore and/or other countries. • SDHC Logo is a trademark of SD-3C, LLC. • All other trademarks are the property of their respective owners.