Installation; Installation Recommendations; Installation Operations - Immergas CAR V2 Wireless Instruction And Warning Book

1.

INSTALLATION

1.1

Installation recommendations.

The CAR , including the relative cables and connections
V2
to the boiler, must be installed by specialised staff. On the
free initial check of the boiler, when the CAR
into the system, the Immergas authorised after-sales centre
checks the connection to the generator terminal board
and adjusts functioning. The free check just of the CAR
is not envisioned by the Immergas authorised after-sales
centre is requested successively to the start phase of the
boiler warranty.
Important: installation of the CAR
included in the free checks of the boiler and is to be carried
out by the installer company.
N.B.: follow the installation sequence by first installing the
Base and then the CAR
1.2

Installation operations.

1) Separate the fixing bottom from the lid of the CAR
Base using a screwdriver as a lever in the relative recess
(Fig. 1-1). Pull the lid manually outwards to separate it
from the bottom.
6
V2
base wires are not
V2
.
V2
2) Install the CAR
its rear part onto the wall or onto a recess box using the
relative supplied screws (Fig. 1-2).
is inserted
V2
3
V2
Base bottom using the openings on
V2
1
2
Fig. 1-1