Check The Rf Signal; Base Test Procedure - Immergas CAR V2 Wireless Instruction And Warning Book

4) Press the OK button on the CAR
5) RF>INS will appear to indicate disassociation/removal
has taken place.
12.8

Check the RF signal.

The RF signal level can vary from 0 (none) to 4 (excellent).
Proceed as follows to verify the signal level:
1) Access the protected menu of the CAR
management (radio frequency): CODE via code "9977";
2) The Test-RF menu will appear (RF>CHK) indicating the
signal level.
34
;
V2
for RF
V2
13. CAR

BASE TEST PROCEDURE

V2
The heating request can be forced directly from the CAR
Base. To do so, press the button (ref. 2 Fig. 2-1) for 2 seconds.
The request at the appliance has duration of 30 seconds, after
which the Base will go back to normal functioning status.
V2