Immergas CAR V2 Wireless Instruction And Warning Book page 28

time and press the button to memorise. When the
first phase has been designed, pass automatically to the next
functioning phases at comfort and economy temperature in
order to program. This means repeating the points described
previously up to phase 4.
The sequences of the On and Off states must always be
sequential. For example, it is not possible to set "OFF 2" at
13.30 and "ON 3" at 11.00.
Once the day or group of days have been programmed,
proceed in the same way for the remaining days and the
remaining programs.
N.B.: if only 3 switch-on times are used, set the fourth with
switch-on/off time at 24.
N.B.: in automatic functioning conditions (
) the
display will show the 24 hour bar indicating the different
time phases with Comfort or Economy temperature
. The presence of the
hyphen on the time bar corresponds to functioning in
Comfort mode.
28