Start-Up; Programming Current Day And Time; Selection Of Functioning Mode - Immergas CAR V2 Wireless Instruction And Warning Book

4.

START-UP

4.1

Programming current day and time.

Switch the remote control on by turning the main selector
onto one of the functions available.
Press the button
mode and press the
On entering the programming mode, the time starts to flash.
Modify the hour and minutes by pressing the + / - buttons
and the button to confirm. Select the day of the week
and confirm using the
Once regulation has been completed, press the
to escape the regulation mode.
16
to enter time and current time
button to modify the settings.
button.
4.2

Selection of functioning mode

According to the functioning mode selected, the CAR
performs the requests of the user, displaying the results
on the display.
By turning the main selector (ref. 1 Fig. 2-2) the following
functions can be selected: Stand-by/Anti-freeze, Summer,
Winter, Cooling.
Note: the room anti-freeze function is active in the following
modes: antifreeze, summer, winter.
• Off mode. The room anti-freeze function is not
button
guaranteed in this mode (the boiler anti-freeze function
remains active). The CAR
and therefore the times and programs remain memorised.
Fig. 4-1
is off but remains powered
V2
V2