Description Of Controls; Description Of Reception Base In Radio Frequency; Base Signals - Immergas CAR V2 Wireless Instruction And Warning Book

2.

DESCRIPTION OF CONTROLS

2.1

Description of reception Base in radio frequency.

The radio frequency reception Base is a device, which allows
heating unit to be controlled by means of programs, settings
and modes determined by the associated CAR
2.2

Base Signals.

The two LEDs on the Base (1 and 3 Fig. 2-1) indicate the
operating status of the Base according to the table below.
1 2
.
V2
Key:
3
1 - Left LED
2 - TEST mode key
3 - Right LED
Fig. 2-1
State Left LED (1)
3 flash every
No synchronisation
Synchronisation
1 flash every
activated
(normal operation)
Association phase
No communication
between the Base and
CAR
V2
No communication
between the Base and
the boiler
synchronised
Test
Forcing manually
Info search from
CAR
V2
Right LED (3)
off
2 s
1 flash every
2 s 60 s
0.5 s On,
0.5 s Off off
for 10 s
3 flashes
off
every 2 s
2 flashes 1 flashes
every 2 s every 60 s
flashes flashes
synchronised
with right with left
LED (5/s) LED (5/s)
3 flashes 3 flashes
every 2 s every 2 s
1 flash
off
every 2 s
11