Table of Contents
Advertisement
1. INTRODUCTION
1.1 Preliminary information
Reproduction, storage or transmission of any part of this publication in any form, without the prior written consent of the Company, is prohibited.
The unit to which these instructions refer, is designed to be used for the the purposes described and to be operated in accordance with these instructions.
The Company will not be liable for claims for damage caused to persons, animals, material goods or property caused by improper installation, adjustment
and maintenance or improper use. Any use not specified in this manual is prohibited.
This document is intended to provide information only and does not form a contract with third parties.
The Company pursues a policy of constant improvement and development of its products and therefore reserves the right to change the specifications and
the documentation at any time, without notice and without obligation to update existing equipment.
1.2 Aim and content of the manual
These instructions are intended to provide the information required for the selection, installation, use and maintenance of the unit.
They have been prepared in accordance with the European Union laws and with the technical standards in force at the date of issue of the instructions.
The instructions contain all the necessary information to prevent any reasonably foreseeable misuse.
1.3 How to store this manual
The manual must be kept in a suitable place with easy access for users and operators, protected from dust and damp.
The manual must always accompany the unit during the entire life cycle of the same and therefore must be transferred to any subsequent user.
1.4 Manual Update
It is recommended that the manual is updated to the latest revision available.
If updates are sent to the customer they must be added to this manual.
The latest information regarding the use of its products is available by contacting the Company.
1.5 How to use this manual
The manual is an integral part of the unit.
Users or operators must consult the manual before performing any operation and especially so when transporting, handling, installating,
maintaining, or dismantling the unit in order to eliminate uncertainty and reduce risk.
In these instructions symbols have been used (described in the following paragraphs) to draw the attention of operators and users to the
operations that have a higher risk and which must be performed safely.
5
Advertisement
Table of Contents
