Inspection - Damage - Shortage; Data Plates - York YK Series Installation Manual

Inspection – damage – shortage
The unit shipment must be checked on arrival to see that all major pieces, boxes, and crates are
received. Each unit must be checked on the trailer or rail car when received, before unloading, for
any visible signs of damage. Any damage or signs of possible damage must be reported to the
transportation company immediately for their inspection.
Figure 2: Form 7 shipment
Note: Johnson Controls will not be responsible for any damage in shipment or at job site or
loss of parts. Refer to Shipping Damage Claims (Form 50.15-NM).
When received at the job site, all containers must be opened and contents checked against the
packing list. Any material shortage must be reported to Johnson Controls immediately. Refer to
Shipping Damage Claims (Form 50.15-NM).

Data plates

A unit data plate is mounted on the Control Center assembly of each unit, giving the following
information:
• Unit model number
• Design working pressure
• Water passes
• Refrigerant charge
• Serial numbers
• Motor power characteristics and connection diagrams
A Control Panel data plate, which includes control panel part number and serial number, is also
included. If the unit is equipped with a Solid State Starter or Variable Speed Drive (optional), it has
its own data plate with serial number.
10 Model YK Chillers (Style H) Field Reassembly for Form 3, 7, 9, and 10 Shipment