Infrared Sensor Board - HP Spectre x360 14 Maintenance And Service Manual

2. Remove the rear speakers (2).
Reverse this procedure to install the rear speakers.

Infrared sensor board

To remove the infrared sensor board, use this procedure and illustration.
Table 5-11 Infrared sensor board description and part number
Description
Infrared sensor board
NOTE: The infrared sensor board spare part kit does not include the infrared sensor board cable. The infrared sensor board cable is
available using spare part number M22151-001.
Before removing the infrared sensor board, follow these steps:
1. Prepare the computer for disassembly
2. Remove the bottom cover
3. Remove the battery (see
4. Remove the system board (see
Remove the infrared sensor board:
1. Remove the two Phillips M2.0 × 1.8 broad head screws (1) that secure the infrared sensor board to the top
cover.
ENWW
(Preparation for disassembly on page
(Bottom cover on page 37).
Battery on page 38).
System board on page
37).
46).
Component replacement procedures
Spare part number
M22164-001
53