Specify An Internet Connection That Uses A Login - NETGEAR Nighthawk AX8 User Manual

• Use Default Address. Use the default MAC address.
• Use Computer MAC Address. The router captures and uses the MAC address
of the computer that you are now using. You must use the one computer that the
ISP allows.
• Use This MAC Address. Enter the MAC address that you want to use.
12. If your DHCP client supports DHCP option 60 or 61, in the DHCP Option section
enter information in the following fields:
• Vendor Class Identifier String (Option 60). This option is used by DHCP clients
to identify themselves to the DHCP server while performing a 4-way handshake.
Enter the vendor class identifier string as indicated by your Internet service
provider (ISP). If your ISP did not provide you with a vender class identifier string,
leave this field blank.
• Client Identifier String (Option 61). This option is used by DHCP clients to
specify a unique client identifier while performing a 4-way handshake. Enter the
client identifier string as indicated by your Internet service provider (ISP). If your
ISP did not provide you with a client identifier string, leave this field blank.
13. Click the Apply button.
Your settings are saved.
14. Click the Test button to test your Internet connection.
If the NETGEAR website does not display within one minute, see You cannot access
the Internet on page 166.

Specify an Internet connection that uses a login

To view or change the basic Internet setup:
1. Launch a web browser from a computer or mobile device that is connected to the
router network.
2. Enter http://www.routerlogin.net.
A login window opens.
3. Enter the router admin user name and password.
The user name is admin. The password is the one that you specified the first time
that you logged in. The user name and password are case-sensitive.
The BASIC Home page displays.
4. Select Internet.
The Internet Setup page displays.
Specify Your Internet Settings
Nighthawk AX8 8-Stream Tri-Band WiFi 6 Router
27 User Manual