Factory Settings - NETGEAR Nighthawk AX8 User Manual

Factory settings

You can return the router to its factory settings. Use the end of a paper clip or a similar
object to press and hold the Reset button on the back of the router for at least seven
seconds. The router resets and returns to the factory configuration settings shown in
the following table.
Table 3. Factory default settings
Feature
Router login
User login URL
User name (case-sensitive)
Login password
(case-sensitive)
Internet connection
WAN MAC address
WAN MTU size
Local network (LAN)
LAN IP
Subnet mask
DHCP server
DHCP range
Time zone
DHCP starting IP address
DHCP ending IP address
Time adjusted for daylight
saving time
Wireless
SSID name
Security
Broadcast SSID
Supplemental Information
Nighthawk AX8 8-Stream Tri-Band WiFi 6 Router
Default setting
www.routerlogin.com or www.routerlogin.net
admin
password
Use default hardware address
1500
192.168.1.1
255.255.255.0
Enabled
192.168.1.2 to 192.168.1.254
Depends on your router's SKU
192.168.1.2
192.168.1.254
Disabled
See router label
WPA2-PSK (AES)
Enabled
173 User Manual