Teledyne Lecroy WaveRunner 8000 Assembly Instructions

WaveRunner 8000/WaveSurfer 510 Rack Mount Accessory
Thank you for purchasing a Teledyne LeCroy rack mount accessory for the WaveRunner 8000 or WaveSurfer 510 oscilloscope.
Please review these instructions before installing the rack mount.
Parts
The rack mount kit is shipped with the following parts. Contact us if parts are missing.
Parts
Mounting brackets with attached handles
M4x20 flat-head Phillips screws (for brackets)
Note: The kit does not include the fasteners needed to attach the rack mount to your equipment rack.
Consult your rack manufacturer regarding the appropriate type, size, and number of fasteners to install the
rack mount securely.
Tools
You will need a Phillips-head screwdriver to attach the rack mount to the oscilloscope.
Dimensions
Weight of instrument, uninstalled: 22.8 lbs [10.3 kg]
Weight of rack mount, uninstalled: 2 lbs [0.9 kg]
Width, installed: 479 mm
928852-00 Rev A
Depth, installed: 307 mm
Assembly Instructions
QTY
2
4
1