York STYLE A YCWS User Manual page 43

FIGURE 11 - OPTIONAL SINGLE POINT POWER SUPPLY WITH INTERNAL CLASS J FUSES/BLOCK
Notes:
1. Dashed line indicates field provided wiring
2. The above recommendations are based upon the National Electric Code and the use of copper connectors only.
Field wiring must comply with local codes.
3. Single point Non-Fused Disconnect Switch is not offered with additional separate Non-Fused Disconnect Switchs
LEGEND
TERM BLOCK
C.B.
NF DISC SW
D.F.
DISC
HZ
MAX
MCA
MIN
MIN NF
RLA
Y-D LRA
YORK INTERNATIONAL
VOLTAGE CODE
17 = 200-3-60
28 = 230-3-60
40 = 380-3-60
46 = 460-3-60
58 = 575-3-60
TERMINAL BLOCK (FACTORY MOUNTED)
CIRCUIT BREAKER (FACTORY MOUNTED)
NON-FUSED DISCONNECT SWITCH (FACTORY MOUNTED)
DUAL FUSE
SW DISCONNECT SWITCH
HERTZ
MAXIMUM
MINIMUM CIRCUIT AMPACITY
MINIMUM
MINIMUM NON FUSED
RATED LOAD AMPS
WYE-DELTA INRUSH LOCKED ROTOR AMPS
FORM 201.24-EG1
43