Siemens PROFIBUS PA SIPART PS2 Manual page 87

1 Display
2 Operation mode key
3 Decrement key
4 Increment key
Figure 4-2 Display and input keys of the positioner
.
Firmware version
Figure 4-3 Firmware version, example: C5
SIPART PS2 PA Manual
A5E00127926-03
1
2 3
Explanations of the input keys
The operation mode key (manual key) serves to switch over the
S
operating mode and pass on parameters.
NOTE
By pressing and holding the operation mode key and additionally
pressing the decrement key, you can select the parameters in reverse
order.
The decrement key
S
guration and to move the actuator in manual operation.
The increment key
S
ration and to move the actuator in manual operation.
The current firmware state is displayed when you exit the configuration
menu.
4
serves to select parameter values in confi-
serves to select parameter values in configu-
Operation
85