Siemens PROFIBUS PA SIPART PS2 Manual page 47

D--76181 Karlsruhe
SIP ARTPS2 i/p Positioner
Iw = 4...20mA
Ta = -- 30... +80
p = 1,4 ... 7bar
F-- N r. N1-- P 212-- 1234567
Fixing device for the slip clutch
Figure 3-6
External
displacement
measurement
SIPART PS2 PA Manual
A5E00127926-03
I P65
NEMA
Type4x
6DR5010-- 0 NG00-- 0 AA0
O C
Iy module
SIA module
Alarm module
MadeinFrance
Applications in which the measures described above are inadequate
are also conceivable. This applies for instance with continuous and
heavy vibration, increased or too low ambient temperatures and in the
case of nuclear radiation.
The separate attachment of position displacement sensor and
controller unit can help here. A universal component is available which
is suitable both for linear and rotary actuators.
You require the following:
The position displacement sensor unit (order no. C73451-
S
A430-D78). This consists of a SIPART-PS2- housing with integrated
slip clutch, built-in potentiometer and various dummy plugs and
seals.
or a Non-Contacting Position Sensor (e.g. 6DR4004--6N)
S
The controller unit, any positioner version.
S
The EMC filter module, this is a set together with cable clips and
S
M-20 screw-type cable gland and has the order number
C73451-A430-D23. The EMC filter module must be installed in the
positioner. The installation instructions enclosed with the EMC filter
module explain how to assemble the components.
A 3-wire cable for connecting the components.
S
This retrofit kit should always be used for the controller unit when any
actuator-mounted potentiometer (resistance 10 kohms) is to be used
instead of the position displacement sensor unit C73451-A430-D78.
Preparing for Operation
45