Siemens PROFIBUS PA SIPART PS2 Manual page 157

Info_Text = "Setpoint"
EndModule
;Extended identifier formats
Module = "READBACK + POS_D, SP"
1 ; Module-Reference
Info_Text = "Readback, discrete Position, Setpoint"
EndModule
Module = "CHECKBACK, SP"
2 ; Module-Reference
Info_Text = "Checkback and Setpoint"
EndModule
Module = "READBACK+POS_D+CHECKBACK, SP"
3 ; Module-Reference
Info_Text = "Readback, discrete Position, Checkback, Setpoint"
EndModule
Module = "RC_OUT, RC_IN"
4 ; Module-Reference
Info_Text = "Remote Cascade Out, Remote Cascade In"
EndModule
Module = "RC_OUT + CHECKBACK, RC_IN"
5 ; Module-Reference
Info_Text = "Remote Cascade Out, Checkback, Remote Cascade In"
EndModule
Module = "RB+ RC_OUT+ POS_D+CB, SP+RC_IN" 0xCB,0x89,0x8E,0x08,0x05,\
6 ; Module-Reference
Info_Text = "Readback, Remote Cascade Out, discrete Position, Checkback, Setpoint, Re-
mote Cascade In"
EndModule
;----------- Description of the module assignment: ---------------------
; Virtual Module assignement with plug in rules
;
; --------------
; ! 0 ! 1
; ! ! !
; ! ! AO !
; ! ! !
; ! !-------
; ------- ^
; !
;Modules !
; !
; -------------- Modultyp 0-6
;
SlotDefinition
Slot(1) = "Analog Output" 3 0 , 1 , 2 , 3, 4 , 5 , 6
;
;
;
;
;
;
EndSlotDefinition
SIPART PS2 PA Manual
A5E00127926-03
0xC6,0x84,0x86,0x08,0x05,\
0x08,0x05,0x05,0x05
0xC3,0x84,0x82,0x08,0x05,\
0x0A
0xC7,0x84,0x89,0x08,0x05,\
0x08,0x05,0x05,0x05,0x0A
0xC4,0x84,0x84,0x08,0x05,\
0x08,0x05
0xC5,0x84,0x87,0x08,0x05,\
0x08,0x05,0x0A
0x08,0x05,0x08,0x05,0x08,\
0x05,0x05,0x05,0x0A
! !......................!
! !
! --------------- Aufzählung der erlaubten Modultypen
!
----------------- Default Modultyp 3:
READBACK+POS_D+CHECKBACK, SP
Scope of delivery
155