Power connector
Table 5-9
Power connector description and part number
Description
Power connector
Before removing the power connector cable, follow these steps:
1.
Prepare the computer for disassembly
2.
Remove the bottom cover (see
3.
Remove the battery (see
Remove the power connector cable:
1.
Remove the three Phillips M2.5 × 6.0 screws from the display hinge (1), and then rotate the hinge to the
upright position (2).
2.
Disconnect the cable from the system board (1).
(Preparation for disassembly on page
Bottom cover on page
Battery on page
25).
22).
23).
Component replacement procedures
Spare part number
L23188-001
37