Installation; Description Of The Device; Installation Recommendations; Packaging - Immergas SUPER TRIO Instructions And Warnings

1

INSTALLATION

1.1 DESCRIPTION OF THE
DEVICE.
The pack described below allows you
to install in a special recessed frame
called "Super Trio" (not included in the
supply) a hydronic unit designed to be
coupled with the Magis Pro - Magis Pro
V2 - Magis Combo Plus - Magis Com-
bo Plus V2 models (excluded from this
supply), able to meet the winter central
heating / C.H., summer cooling needs,
as well as the production of domestic
hot water, possibly with solar integra-
tion (via special optional kit).
1.2 INSTALLATION
RECOMMENDATIONS.
The pack has been designed solely for
wall installation using the special "Su-
per Trio" (recessed frame).
The place of installation of the appli-
ance and relative Immergas accessories
must have suitable features (technical
and structural), such as to allow for (al-
ways in safe, efficient and comfortable
conditions):
- installation (according to the pro-
visions of technical legislation and
technical regulations);
- maintenance operations (including
scheduled, periodic, routine and
special maintenance);

1.3 PACKAGING.

- removal (outdoors in the place for
loading and transporting the appli-
ances and components) as well as
their eventual replacement with appli-
ances and/or equivalent components.
Only a professionally qualified heating/
plumbing technician is authorised to
install the pack.
Installation must be carried out accord-
ing to regulation standards, current
legislation and in compliance with local
technical regulations and the required
technical procedures. Before installing
the pack, ensure that it is delivered in
perfect condition; if in doubt, contact
the supplier immediately. Packing ma-
terials (staples, nails, plastic bags, poly-
styrene foam, etc.) constitute a hazard
and must be kept out of the reach of
children. Keep all flammable objects
away from the appliance (paper, rags,
plastic, polystyrene, etc.). In the event
of malfunctions, faults or incorrect op-
eration, turn the device off immediately
and contact an authorised company
(e.g. the Immergas Technical Assis-
tance Centre, which has specifically
trained staff and original spare parts).
Do not attempt to modify or repair the
appliance alone. Failure to comply with
the above implies personal responsibil-
ity and invalidates the warranty.
5
• Installation Standards: this pack must
be installed inside an external wall
using the special "Super Trio" and
securing it with the support brackets
supplied together with the pack itself.
It was not designed to be installed
on plinths or floors and without the
special recessed frame.
Attention: installation of the "Super
Trio" in the wall must ensure a stable
and efficient support of the pack. The
kit ensures appropriate support only
if installed correctly (according to the
rules of good practice), following the
instructions on its instructions leaflet.
The "Super Trio" for pack is not a sup-
porting structure and cannot replace
the piece of wall removed. It is therefore
necessary to check correct positioning
inside the wall. For safety reasons
against any leaks it is necessary to plas-
ter the pack housing in the brick wall.
This pack is used to heat water to below
boiling temperature in atmospheric
pressure. It must be connected to a cen-
tral heating system and domestic hot
water circuit suited to its performance
and capacity.
"Anti-legionella" heat treatment of the
Immergas storage tank (activated by
the specific function present on the pre-
disposed thermoregulation systems):
during this stage, the temperature of
the water inside the storage tank ex-
ceeds 60°C with a relative risk of burns.
Keep this domestic hot water treatment
under control (and inform the users)
to prevent unforeseeable damage to
people, animals, things.
1