Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Ricoh BookletMaker SR85
Summary of Contents for Ricoh BookletMaker SR85
- Page 1 x04034 Operator Manual SR85/CF85 COVER FEEDER October 2001...
- Page 2 Operator Manual SR85/CF85 COVER FEEDER...
-
Page 3: Table Of Contents
Table of contents 1. Introduction page 1.1 Operational safety 2. Getting to know the Cover Feeder 2.1 Main components 2.2 The control panel 3. Operating modes 3.1 The Online/Offline mode 3.2 The Operating modes 3.3 Indications 4. Operator instructions 4.1 Load paper 4.2 Loading paper during run 4.3 Set the first job 5. -
Page 4: Introduction
1. Introduction 1.1 Operational safety Attention to the following notes ensures the continued safe operation of your equipment. Always connect the equipment to a properly Never use a ground adapter plug to connect grounded power source receptacle. In doubt, the equipment to a power source receptacle have the receptacle checked by a qualified that lacks a ground connection terminal. -
Page 5: Getting To Know The Cover Feeder
2. Getting to know the Cover Feeder 2.1 Main components Rear side guide Feed roller assembly Paper separator pad Control panel Bin extension plate Loading capacity mark Air nozzle Front side guide and Paper orientation label Loading handle Length adjustment handle Copier finisher connector Booklet maker connector Power Supply connector... - Page 6 2.1 Main components, continues Upper paper path Jam clearance baffle Operator Manual SR85/CF85 COVER FEEDER...
- Page 7 2.2 The control panel 9 10 Flashing light, Bin low detection Constant light, Empty Paper Bin detection Constant light, Double feed detection or Paper jam indication Flashing light, Missfeed detection Offline Online Online/Offline button Single sheet mode Copier cover mode Operating select button Operator Manual SR85/CF85 COVER FEEDER...
-
Page 8: Operating Modes
3. Operating modes The Cover Feeder can be operated in two modes. It is possible to select two Operating modes. In this section we will explain the modes and how they are selected. 3.1 The Online/Offline mode The two modes are: Online mode The Online mode is selected on a unit, that is to operate together with a copier as an on-line system. - Page 9 3.3 Indications LED- PROBLEM INDICATED BY NOTES INDICATION DESCRIPTION LEDs Flashing light Misfeed detection Can be caused by: Constant light Double sheet detected Double sheets Reduced paper feed capability Constant light Jam detected Paper jam Bin low detection Flashing light Constant light Empty bin detection Operator Manual SR85/CF85 COVER FEEDER...
-
Page 10: Operator Instructions
4. Operator instructions 4.1 Load paper Make sure that the sheets are well fanned to avoid missfeeds or double-feeds. Align the sheets well to achieve a reliable collating operation and good finishing result. Make sure that the ink has dried out well, to avoid smearing. - Page 11 4.3 Set the first job Set the Online/Offline button to Online position. The Cover Feeder will prefeed the first cover to be ready for the first set from the copier. Send a set from the copier, and the Cover Feeder will automatically feed covers to the sets.
-
Page 12: Maintenance
5. Maintenance 5.1 Cleaning feed rollers and paper separator pad The Feed rollers need to be cleaned if the unit has not been used for a period of time, and cleaned regularly when in use. How often this should be done, depends on paper type and print quality. -
Page 13: Clearing Jams
6. Clearing Jams 6.1 Clearing jams in vertical transport area If a jam should occur in the vertical transport area, undock the Booklet maker then lift up the upper paper path, and release the Jam clearance baffle. Remove the jammed cover. Press the Online/Offline button twice, to set the Cover Feeder to Operational mode. -
Page 14: Specifications
7. Problem solving 7.1 Problem solving PROBLEM POSSIBLE CAUSES ACTION Machine in jam condition. Clear jam. The machine is inoperative as Empty Paper Bin. Load paper the Online/Offline button is pressed. SR85 or Copier shut down. Correct the problem in the SR85 or the Copier. -
Page 15: Specifications
8. Specifications 8.1 Specifications Number of bins Bin capacity 20 mm Length range 279 - 457 mm / 11” - 18” 210 - 320 mm / 8,25” - 12,6” Width range 70 gsm / 19 lb Paper weight, minimum 200 gsm / 110 lb Paper weight, maximum Double feed detection Missfeed detection...