Introduction And Safety Information; Document History; Product Compatibility; Precondition For Use - Siemens SIPART PS100 Operating Instructions Manual

Introduction and safety information

1.1

Document history

The most important changes in the documentation when compared with the respective
previous edition are given in the following table.
Edition
11/2019
04/2019
10/2018
1.2

Product compatibility

Manual ed‐
ition
11/2019
04/2019
10/2018
1.3

Precondition for use

This device left the factory in good working condition. In order to maintain this status and to
ensure safe operation of the device, observe these instructions and all the specifications
relevant to safety.
Observe the information and symbols on the device. Do not remove any information or symbols
from the device. Always keep the information and symbols in a completely legible state.
SIPART PS100
Operating Instructions, 11/2019, A5E45863537-AC
Comment
● Text changes
● New article number 6DR710. for polycarbonate lid with window
● Material extended in section "Technical specifications > Mechanical construction
(Page 39)".
● Change in section "Technical specifications > Controller (Page 40) > Deadband"
● Description of parameters improved in section "Parameter assignment and
Addressing (Page 25)".
● Not published
First edition
Comments Device revision
New manual ed‐ FW: 1.00.00
ition
Device revision 1
Not published Not published
First edition FW: 1.00.00
Device revision 1
Compatible version of device in‐
tegration package
-
-
-
1
5