Related Manuals for Record STA20
Summary of Contents for Record STA20
- Page 1 Record STA20 RETRO-FIT GUIDE For the BESAM SL500 To be read in conjunction with the quick start manual RECORD UK DIRECT 25-03-2019 Page 1...
- Page 2 / adaptions may be required on site. Please check your sensors etc for compatibility. All safety sensors must be cat C or above Please refer to the enclosed quick start guide for basic wiring and set up of the STA20 retrofit kit.
- Page 3 ( see fig 3). The universal idler pulley should be mounted in the same way on the left of the operator see Fig 4 Fig : 3 Fig 4 RECORD UK DIRECT 25-03-2019 Page 3...
- Page 4 Install the BDED in the required place and plug in. Your door system is now ready to wire up any sensors / Auxiliary Items to. Please reference the Quick Start Manual enclosed with this guide. RECORD UK DIRECT 25-03-2019 Page 4...
- Page 5 STA 20 Basic quick set up with record sensors This Quick Guide is intended for use by trained engineers. If you have not had training on the equipment then it is possible to set the doors up unsafely. All automatic door installations should be installed and set up to comply with EN16005...
- Page 6 13. Select Continue It will then ask you if you would like to learn the sensors – if Record sensors are fitted then Select YES . If third party sensors are fitted select no...
- Page 7 RECORD UK DIRECT 25-03-2019 Page 7...
- Page 8 E.g AKA 1 = Outer Sensor 1 & AKA 2 = Outer sensor 2. AIS290 Side Screen Sensors SL = Left hand Side Screen Safety sensor SR = Right hand Side Screen Safety sensor RECORD UK DIRECT 25-03-2019 Page 8...
- Page 9 AKI = internal activation SI =internal Threshold safety SL =LH SIDE SCREEN SAFETY sssssafetySafety There are several adjustable parameters for each sensor. Please treat the Activation and safety of each sensor as separate entities. RECORD UK DIRECT 25-03-2019 Page 9...
- Page 10 E.g If you had a narrow door way you may select Map 3 or for No Approach from the Right you select Map 18 FIELD SIZE S Now It Is time to set up Your Speeds & running Parameters RECORD UK DIRECT 25-03-2019 Page 10...
- Page 11 ON To reset the door: Press and hold the Record logo for 10-13sec. The screen will scroll through various software info, followed by yes / No the option to reset . Upon selecting Yes the doors will come to the closed position and reset. After 3sec activate the doors to open so they may go through one learn cycle of open / close (moves slowly) and complete their reset cycle.
- Page 12 RECORD UK DIRECT 25-03-2019 Page 12...
- Page 13 RECORD UK DIRECT 25-03-2019 Page 13...
- Page 14 RECORD UK DIRECT 25-03-2019 Page 14...
- Page 15 RECORD UK DIRECT 25-03-2019 Page 15...
- Page 16 RECORD UK DIRECT 25-03-2019 Page 16...