Outputs; Relay; Auxiliary Speaker; Audio - Algo 8180 User Manual

Loud ringer

Hide thumbs Also See for 8180:

User manual (65 pages)

Technical publications (25 pages)

Manual (3 pages)

Table Of Contents

Outputs

Relay

May be enabled for ring to activate a visual alerter, mute background music, or enable a slave amplifier.

Auxiliary Speaker

For connection to the optional Algo horn speaker (e.g. for outdoor/wet locations) or to ceiling speakers wired in a series-parallel

configuration to maintain minimum 8 Ω. The presence of an external speaker(s) will automatically disable the internal speaker to

preserve power.

Audio

High impedance output for driving 600 Ω load up to 0 dBm. Internal speaker may be active simultaneously, but levels cannot be

adjusted separately.

Programming and Configuration

Primary configuration of the 8180 is through the web interface control panel. In addition, there are program buttons on the unit itself

for basic setup options.

Connection to Network and Obtaining IP Address

After connecting the 8180 to a network PoE port, the blue indicator light will turn on during initialization. The 8180 will then attempt

to obtain an IP address from the DHCP server. If unsuccessful, the 8180 will default to the fixed IP address 192.168.1.111. When the IP

address is selected, the 8180 will chime and turn off the blue light.

If you don't have a PoE switch, you'll need a PoE injector that installs between the 8180 and network switch. The PoE injector will supply 48 Vdc to the 8180.

Note:

Most PoE injectors are capable of providing more power than the 8180 requires (12.95 W). Ensure that the PoE injector is fully compliant to the IEEE 802.3af

standard.