Algo 8180 Technical Publications
  1. Manuals
  2. Brands
  3. Algo Manuals
  4. Security System
  5. 8180
  6. Technical publications

Algo 8180 Technical Publications

Integration with zultys
Hide thumbs Also See for 8180:
Table of Contents

Advertisement

Quick Links

Download this manual
13
Technical Publications
January
Algo 8180 Integration with Zultys
Author: Zultys Technical Support Department
This document describes the integration of Algo 8180 SIP Audio Alerter with the Zultys MX. Algo 8180 can be
integrated as a "night bell", a paging device or a page server used to relay a SIP-based page into a multicast page
zone, or using the built-in audio out option. Multiple Algo units can be linked together to cover larger areas.
Algo 8180 can support 1 "ringing" user or DN and 1 "paging" user or DN, as well as a 9 (nine) multicast address.
When Algo 8180 is utilized as a loud ringer/bell the "ringing user" is used and when paging Algo 8180 the "paging
user" is used, as the paging user will auto answer. The ringing user can play up to 4 (four) unique alerting tones
based on the "TO" information provided.
For night bell operation with multiple ring tones, firmware 2.0.3.1 is required.
Currently Algo 8180 can handle a single call at one time.
This document assumes the reader is familiar with creating users and assigning users to devices, as well as the
basic configuration of the MX.
For full documentation of Algo 8180, refer to the User Guide provided by Algo.
Z u l t y s , I n c . 7 8 5 L u c e r n e S u n n y v a l e , C a l i f o r n i a , U S A 9 4 0 8 5 w w w . z u l t y s . c o m

Advertisement

Table of Contents
loading

Related Manuals for Algo 8180

Summary of Contents for Algo 8180

  • Page 1 Multiple Algo units can be linked together to cover larger areas. Algo 8180 can support 1 “ringing” user or DN and 1 “paging” user or DN, as well as a 9 (nine) multicast address.

  • Page 2: Table Of Contents

    SIP P ....................7 AVEATS OF AGING 5.3 A SIP P ....................7 DVANTAGES OF AGING 6 CONFIGURING RINGING DEVICE ON THE MX FOR ALGO 8180 ......... 7 6.1 C SIP P ....................7 REATE ENERIC ROFILE 6.2 C SIP D ....................
  • Page 3 17.1 T .................. 24 ISTEN FOR ULTICAST PAGING 17.2 T ................... 25 ULTICAST PAGES Algo 8180 Integration with Zultys (0000000373) / Revision 2 January 9, 2013 © 2013 Zultys, Inc. No reproduction of distribution without permission Page 3 of 25...

  • Page 4: Algo 8180 Information

    2.1 Device Settings and Specifications 2.2 Algo 8180 Limitations Algo 8180 can only support a single call at a time. When multiple calls are sent to Algo 8180, it will only accept the first call it receives. If the second call is still...

  • Page 5: Modes Of Operation

    Night Bell modes. 3.1.1 SIP Page Mode In SIP page mode, Algo 8180 is configured as a device in the MX’s Page Zone that will be paged alongside other devices in that page zone. Algo 8180 will receive a SIP INVITE, accept and answer it automatically, then play the page over its built-in “loud speaker”.

  • Page 6: Multicast Paging

    4.2 Caveats of Multicast Paging Multicast paging is designed for ZIP5/ZIP3 phones only. There is no guaranteed interoperability with any other Zultys-supported phones. Algo 8180 is an exception, as it has been tested and certified to work properly with the ZIP5/ZIP3 phones.

  • Page 7: Advantages Of Multicast Paging

    Algo 8180 interfaces with the MX system through a preconfigured MX user. A single user / device will interface with the MX for ringing purposes. To initiate Algo 8180’s loud ringer/bell function, place a call to this user / device combination and it will “ring” until the call is answered.

  • Page 8: Create Generic Sip Device

    The remaining options are unchecked. 6.2 Create Generic SIP Device Create a generic SIP device on the MX for the MX to integrate with Algo 8180. Make sure that the following options are selected. Algo 8180 Integration with Zultys (0000000373) / Revision 2 January 9, 2013 ©...

  • Page 9: Create User And Assign User To The Device

    6.3 Create User and Assign User to the Device After creating the device that will interface with Algo 8180, create a user and assign the user to this device. This document assumes the reader is a ZCSE trained and a certified technician.

  • Page 10: Configuring Paging Device On The Mx For Algo 8180

    The remaining options are unchecked. 7.2 Create Generic SIP Device Create a generic SIP device on the MX for the MX to integrate with Algo 8180. Make sure that the following options are selected. Algo 8180 Integration with Zultys (0000000373) / Revision 2 January 9, 2013 ©...

  • Page 11: Create User And Assign User To The Device

    7.3 Create User and Assign User to the Device After creating the device that will interface with Algo 8180, create a user and assign the user to this device. This document assumes the reader is a ZCSE trained and a certified technician.

  • Page 12: Programming And Configuration

    In addition, there are program buttons on the unit itself for basic setup options. Connect Algo 8180 to a network PoE port. The blue indicator light turns on during initialization. Algo 8180 then attempts to obtain an IP address from the DHCP server.

  • Page 13: Web Interface

    8.3 Network Setup of Algo 8180 In most cases, it is not necessary to assign a static IP to Algo 8180 because it is register with the MX, so the MX is aware of Algo 8180’s IP address at all times.

  • Page 14: Administration Of Algo 8180

    Please contact Algo with your request.) Voice Prompt: Set Voice Algo 8180 Integration with Zultys (0000000373) / Revision 2 January 9, 2013 © 2013 Zultys, Inc. No reproduction of distribution without permission Page 14 of 25...

  • Page 15: Configuring The Ringing User On Algo 8180

    Hold the button until the front light flashes three times. 9 Configuring the Ringing User on Algo 8180 The “ringing” user on Algo 8180 is used when Algo 8180 is deployed as a ringing device, and will continue to ring until the call is answered. To configure the user for the “ringing”...

  • Page 16: Configuring The Paging User On Algo 8180

    11.1 Standalone SIP Page Server When using Algo 8180 as a standalone page zone, you would call the extension associated with the “Page” user, and a SIP call will be placed to Algo 8180 and it is responsible for delivering the page.

  • Page 17: Sip Page Using The Mx Page Server/Zones

    Algo 8180 “Paging” user into the same page zone. When the Page zone is accessed, Algo 8180 will also be included when the MX places a SIP call to Algo 8180 unit and it will auto answer the call alongside all the other devices in the zone.

  • Page 18: Sip And Multicast Paging

    Technical Publications 11.4 SIP and Multicast Paging In SIP and Multicast mode, Algo 8180 is a member of the MX Page Zone, so a SIP call is placed to Algo 8180 “paging” user and when the device answers the call, it immediately starts streaming the SIP page into a Multicast page zone.

  • Page 19: Night Bell With Multiple Tones

    ZCSE training, it is considered to be outside the scope of this document. Add User to the Call Group Add Algo 8180’s “Ringing” user to a call group, in this example we will use a Hunt Group as it does not require login. If ICC/ACD/Operator groups are required, log the user in utilizing DTMF Controls.

  • Page 20: Algo 8180 Configuration

    Advanced Ring Tone Settings “ ”. Make sure that the following options are selected. Algo 8180 Integration with Zultys (0000000373) / Revision 2 January 9, 2013 © 2013 Zultys, Inc. No reproduction of distribution without permission Page 20 of 25...

  • Page 21: Definition Of "Rule" Field

    Once you finish configuring the ring tones and rules, click the button at the top of the page. Algo 8180 Integration with Zultys (0000000373) / Revision 2 January 9, 2013 © 2013 Zultys, Inc. No reproduction of distribution without permission...

  • Page 22: Uploading Ringtones

    Technical Publications 14 Uploading Ringtones Ringtones can be uploaded to Algo 8180, and all ring tones can be managed from the web interface of the Algo Unit. Ringtones must be: 8KHz or 16KHz, 16-bit, Mono, PCM or u-law Wave File format Only.

  • Page 23: Zip5Xi Multicast Setup

    Services. 3. Login to the device again, and click on 4. In the Upgrade section, click on Browse and select Algo 8180 firmware file to upload. Note that both the FW firmware and MD5 checksum files must be loaded.

  • Page 24: Example 1 (57I)

    [ cfg:/phone/config/vpPhone/MulticastPage.cfg,reboot=0 ] ListenAddress1.Label = Page_MC ListenAddress1.IPAddress = 224.0.0.3:10000 Algo 8180 Integration with Zultys (0000000373) / Revision 2 January 9, 2013 © 2013 Zultys, Inc. No reproduction of distribution without permission Page 24 of 25...

  • Page 25: T Omake Multicast

    [ cfg:/phone/config/vpPhone/vpPhone.ini,reboot=1 ] memory6.DKtype = 24 memory6.Line = 0 memory6.Value = 224.0.0.3:10000 memory6.PickupValue = Algo 8180 Integration with Zultys (0000000373) / Revision 2 January 9, 2013 © 2013 Zultys, Inc. No reproduction of distribution without permission Page 25 of 25...

Table of Contents