HP ZBook Fury 17 G7 Maintenance And Service Manual page 98

1. Remove the WLAN module Mylar shield (1) and the WWAN module Mylar shield.
The WLAN/WWAN module Mylar shields are included in the Mylar Kit, spare part number M23349-001.
2. Disconnect the wireless antenna cables (2) from the WLAN module and the WWAN module.
The #1/white WLAN antenna cable connects to the WLAN module #1/Main terminal. The #2/black WLAN
antenna cable connects to the WLAN module #2/Aux terminal. The #5/blue WWAN antenna cable connects
to the WWAN module #5/Main terminal. The #6/red WWAN antenna cable connects to the WWAN module
#6/Aux terminal.
3. Disconnect the webcam module cable (3) from the system board.
4. Release the webcam module cable and the wireless antenna cables from the retention clips (4) built into
the top cover.
5. Disconnect the display panel cable (5) from the system board.
6. Release the display panel cable from the retention clips (6) built into the top cover.
84 Chapter 6 Removal and replacement procedures for authorized service provider parts ENWW