43.9 Cm (17.3 In ) Display Assembly - HP ZBook Fury 17 G7 Maintenance And Service Manual

43.9 cm (17.3 in ) display assembly

To remove and disassemble the display assembly, use these procedures and illustrations.
The display assembly is available as both a full hinge-up assembly and at the the subcomponent level. Full
hinge-up assembly spare part information is presented in the following table. Subcomponent level spare part
information is available in the subcomponent level disassembly subsection.
Table 6-8 43.9 cm (17.3 in ) display assembly description and part numbers
Description
UHD (3840×1980), Dream Vision, 550 touchscreen display assembly with webcam and infrared sensor;
typical brightness: 400 nits
UHD (3840×1980), Dream Vision, 550 touchscreen display assembly with webcam; typical brightness: 400
nits
UHD (3840×1980), Dream Vision, 550 touchscreen display assembly; typical brightness: 400 nits
UHD (3840×1980), antiglare, 550 touchscreen display assembly with HD webcam and infrared sensor;
typical brightness: 400 nits
UHD (3840×1980), antiglare, 550 touchscreen display assembly with HD webcam; typical brightness: 400
nits
UHD (3840×1980), antiglare, 550 touchscreen display assembly; typical brightness: 400 nits
FHD (1980×1080), antiglare, touchscreen display assembly with HD webcam and infrared sensor; typical
brightness: 300 nits
FHD (1980×1080), antiglare, touchscreen display assembly with HD webcam and ambient light sensor;
typical brightness: 300 nits
FHD (1980×1080), antiglare, touchscreen display assembly; typical brightness: 300 nits
Before removing the display assembly, follow these steps:
1. Prepare the computer for disassembly
2. Remove the service cover
1. Battery (see
2. Solid-state drives 3 and 4 (see
3. Solid-state drive carrier (see
4. Hard drive (see
5. Keyboard (see
6. Bottom case (see
7. Fan/heat sink assembly (see
Remove the display assembly:
ENWW
(Preparation for disassembly on page
(Service cover on page
Battery on page 41)
Solid-state drives 3 and 4 on page
Solid-state drives 3 and 4 on page
Hard drive on page 44)
Keyboard on page 54)
Bottom case on page
Fan/heat sink assembly on page
40), and then remove the following components:
42)
66)
79)
Component replacement procedures
Spare part number
M20125-001
M20124-001
M20122-001
M23512-001
M23511-001
M23510-001
M23508-001
M23509-001
M23507-001
66).
42)
83