HP ZBook Fury 17 G7 Maintenance And Service Manual page 91

NOTE: The NFC module spare part kit includes NFC module.
Table 6-5 NFC module description and part number
Description
NFC module
NOTE: The NFC module spare part kit does not include the NFC module cable. The NFC module cable is
available in the Cable Kit, spare part number M20105-001.
Before removing the NFC module, follow these steps:
1. Prepare the computer for disassembly
2. Remove the service cover
1. Battery (see
2. Solid-state drives 3 and 4 (see
3. Solid-state drive carrier (see
4. Hard drive (see
5. Keyboard (see
6. Bottom case (see
Remove the NFC module:
1. Release the ZIF connector (1) to which the NFC module cable is connected, and then disconnect the NFC
module cable from the system board.
2. Release the ZIF connector (2) to which the NFC module cable is connected, and then disconnect the NFC
module cable from the NFC module.
3. Detach the NFC module cable (3) from the top cover. (The NFC module cable is attached to the top cover
with double-sided adhesive.)
ENWW
(Preparation for disassembly on page
(Service cover on page
Battery on page 41)
Solid-state drives 3 and 4 on page
Solid-state drives 3 and 4 on page
Hard drive on page 44)
Keyboard on page 54)
Bottom case on page
40), and then remove the following components:
42)
66)
Component replacement procedures
Spare part number
M17065-001
66).
42)
77