HP ZBook Fury 17 G7 Maintenance And Service Manual page 77

3. Remove the cover (3) by sliding it to the right at an angle.
A thermal pad services solid-state drive 1 and is located on the solid-state drive cover. This pad should be
inspected each time that the cover is removed. This pad is intended to be reused if it is not damaged. If this
pad is damaged and any residue remains on the solid-state drive (1) or the cover (2), it should be
thoroughly removed and replaced. If protective releasing paper is attached to the thermal pad, it should be
removed prior to replacement.
ENWW Component replacement procedures 63