HP ZBook Fury 17 G7 Maintenance And Service Manual page 73

1. Prepare the computer for disassembly
2. Remove the service cover
3. Remove the battery (see
4. Remove the keyboard (see
If you are replacing memory modules 1 and 3, remove the existing memory module:
1. Remove the two Phillips M2.0 × 2.9 screws (1) that secure the memory module compartment cover to the
computer.
2. Lift the front edge of the cover (2) and swing it up and back until it rests at an angle.
ENWW
(Preparation for disassembly on page
(Service cover on page 40).
Battery on page 41).
Keyboard on page 54).
66).
Component replacement procedures 59