HP ZBook Fury 17 G7 Maintenance And Service Manual page 66

Table 5-8 Memory module descriptions and part numbers
Description
32 GB (2666 MHz, 1.2 V, DDR4)
16 GB (2666 MHz, 1.2 V, DDR4, ECC)
16 GB (2666 MHz, 1.2 V, DDR4)
8 GB (3200 MHz, 1.2 V, DDR4)
8 GB (2666 MHz, 1.2 V, DDR4, ECC)
Before removing memory module 2 and 4, follow these steps:
1. Prepare the computer for disassembly
2. Remove the service cover
3. Remove the battery (see
If you are replacing memory module 2 and 4, remove the existing memory module:
1. Remove the Phillips M2.0 × 2.9 screw (1) that secures the memory module compartment cover to the
computer.
Lift the left side of the cover (2) and swing it up and to the right until it rests at an angle.
Remove the cover (3) by sliding it to the left at an angle.
To protect a memory module after removal, place it in an electrostatic-safe container.
52 Chapter 5 Removal and replacement procedures for Customer Self-Repair parts
(Preparation for disassembly on page
(Service cover on page 40).
Battery on page 41).
Spare part number
L50384-001
L24981-001
937438-950
L46598-001
L24983-001
66).
ENWW