Solid-State Drive Specifications; Solid-State Drive Specifications (Sata-3) - HP ZBook Fury 17 G7 Maintenance And Service Manual

Table 11-3 Hard drive specifications (continued)
*Size refers to hard drive storage capacity. Actual accessible capacity is less. Actual drive specifications can differ slightly.
NOTE: Certain restrictions and exclusions apply. Contact support for details.

Solid-state drive specifications

This section provides specifications for your solid-state drives.
Table 11-4 Solid-state drive specifications
Dimensions
Height
Length
Width
Weight
Interface type
Ready time, maximum (to not busy)
Access times, logical
Transfer rate
Sequential read
Random read
Sequential write
Random write
Total logical sectors
Operating temperature
*1 GB = 1 billion bytes when referring to hard drive storage capacity. Actual accessible capacity is less.
Actual drive specifications may differ slightly.
NOTE: Certain restrictions and exclusions apply. Contact support for details.

Solid-state drive specifications (SATA-3)

This section provides specifications for your solid-state drive.
Table 11-5 Solid-state drive specifications
Dimensions
Height
198 Chapter 11 Specifications
500 GB*
256 GB* 512 GB*
1.0 mm 1.0 mm
50.8 mm 50.8 mm
28.9 mm 28.9 mm
< 10 g < 10 g
PCIe PCIe
1.0 ms < 1.0 ms
0.1 ms 0.1 ms
up to 2150 MB/s up to 2150 MB/s
Up to 300,000 IOPs Up to 300,000 IOPs
up to 1550 MB/s up to 1550 MB/s
Up to 100,000 IOPs Up to 100,000 IOPs
468,883,296 1,000,215,216
0°C to 70°C (32°F to 158°F)
750 GB*
1 TB*
1.0 mm
50.8 mm
28.9 mm
< 10 g
PCIe
1.0 ms
0.1 ms
up to 2150 MB/s
Up to 300,000 IOPs
up to 1550 MB/s
Up to 100,000 IOPs
1,500,336,388
128 GB*
1.35 mm
ENWW