HP ZBook Fury 17 G7 Maintenance And Service Manual page 186

Table 7-54 POST error messages and user actions to address the error (continued)
Test description
Hard Disk Test
Hard Disk Test
Hard Disk Test
Hard Disk Test
Hard Disk Test
Hard Disk Test
Boot Device
Manager
Boot Device
Manager
Boot Device
Manager
Boot Device
Manager
Boot Device
Manager
BIOS Recovery
BIOS Application
CMOS Recovery
Battery Check
172 Chapter 7 Troubleshooting guide
Failure descriptions Error code
Hard Disk 1 SMART 301
Hard Disk 2 SMART 302
Hard Disk 1 Quick 303
Hard Disk 2 Quick 304
Hard Disk 1 Full 305
Hard Disk 2 Full 306
Boot device not found 3F0
Hard Disk 1 Error 3F1
Hard Disk 2 Error 3F2
Hard Disk 1 SMART 301
Hard Disk 2 SMART 302
BIOS Recovery 500
Occurred
BIOS Application Error 501
CMOS Recovery 502
Occurred
Primary Battery 601
Replace
Possible user actions
Attempt to reseat the hard drive and repeat the test.
The hard drive might have failed. Contact support for assistance.
The hard drive might have failed. Contact support for assistance.
The hard drive might have failed. Contact support for assistance.
The hard drive might have failed. Contact support for assistance.
The hard drive might have failed. Contact support for assistance.
The hard drive might have failed. Contact support for assistance.
This code indicates a potential problem with the hard drive. Run the hard
drive test.
See https://support.hp.com/emea_africa-en/document/c01443371
more information.
Indicates a potential problem with the hard drive. Run the hard drive test.
See https://support.hp.com/emea_africa-en/document/c01443371
more information.
This code indicates a potential problem with the hard drive. Run the hard
drive test.
See https://support.hp.com/emea_africa-en/document/c01443371
more information.
This code indicates a potential problem with the hard drive. Run the hard
drive test.
See https://support.hp.com/emea_africa-en/document/c01443371
more information.
This code indicates a potential problem with the hard drive. Run the hard
drive test.
See https://support.hp.com/emea_africa-en/document/c01443371
more information.
This message indicates that BIOS recovery was completed successfully. No
further action is required.
The BIOS installation might have become corrupted. Download the latest
version of the BIOS and install it. See
on page 107 for more information.
If reinstalling the BIOS fails, contact support for further assistance.
This message indicates that CMOS recovery was completed successfully. No
further action is required.
This code indicates that the primary battery has very low capacity.
Search http://www.hp.com/support
Assistant to verify the battery capacity and, if necessary, order a
replacement.
4. Update BIOS and drivers
for details about using the HP Support
for
for
for
for
for
ENWW