Hp Hardware Diagnostics And Tools; Hp Pc Hardware Diagnostics (Uefi) - HP ZBook Fury 17 G7 Maintenance And Service Manual

Mobile workstation
Hide thumbs Also See for ZBook Fury 17 G7:
Table of Contents

Advertisement

6. HP Hardware Diagnostics and Tools

HP offers diagnostics and tools to diagnose hardware failure. This section describes how to use some of these
tools. Make sure to check for the latest versions before use.

HP PC Hardware Diagnostics (UEFI)

HP PC Hardware Diagnostics is a Unified Extensible Firmware Interface (UEFI) that allows you to run diagnostic
tests to determine whether the computer hardware is functioning properly.
The HP PC Hardware Diagnostics (UEFI) tool is built within BIOS (basic memory and hard drive diagnostics only),
or within new hard drives themselves. These drives contain more advanced versions of the diagnostic tool than
the BIOS-based version.
In addition, for HP authorized service partners and IT professionals who need to support a mixed environment of
older and newer HP/Compaq PCs, the HP PC Hardware Diagnostics Tool
hpsupportassistant/pc-diags.html?jumpid=va_r602_us/en/any/pps/pl_ot_ob_ds_pd/
HP_PC_Hardware_Diagnostics_cc/dt) supports a wide range of HP computers.
The tool runs outside the operating system so that it can isolate hardware failures from software issues,
whether caused by the operating system or applications. In reality, you can determine many problems using this
tool if the issue is a defective part or a loose connection (for example, reseating the keyboard cable after the tool
reports a keyboard error).
The tool has three major functions:
System Tests check the computer's hardware to verify that everything is functioning properly. If your
system won't boot into Windows, try the Quick System Test. For more comprehensive testing, use the
Extensive System Test option. If the System Test did not detect a hardware problem, continue with the
Component Tests.
Component Tests focus on selected hardware components in your computer.
Firmware Management update your computer's BIOS to the latest version (available separately) or rolls
back to a previous version.
1.
Turn on or restart the computer, quickly press the
searches three places for the diagnostic tools, in the following order:
1.
2.
3.
ENWW
Connected USB drive
Hard drive
BIOS
(http://www8.hp.com/us/en/campaigns/
esc
key on the computer, and then press f2. The BIOS
General troubleshooting steps 109

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents