Immergas VICTRIX PRO 1 I Series Technical Sheet page 73

VICTRIX PRO 1 I
4 Setting central heating parameters.
The window to cascade these parameters automatically opens
when you click on a variable/editable parameter.
The parameters can be edited by clicking on the symbols "+" or
"-". Click on "Prog" to store the set value. Press "Esc" to exit the
setting mode and close the window.
5 Setting domestic hot water parameters.
The window to cascade these parameters automatically opens
when you click on a variable/editable parameter.
The parameters can be edited by clicking on the symbols "+" or
"-". Click on "Prog" to store the set value. Press "Esc" to exit the
setting mode and close the window.
NOTE:
In terms of the entries on variable parameters, relative ex-
planations and possible settings, you will need to refer to the
instructions handbook furnished with the cascade and zone
regulator code 3.015244.
73