Changing Your Battery - Dyson V11 Absolute User Manual

Charging and storing
your machine
It's important to fully charge your new machine before using it for the first time,
and after every clean. This is because the battery and monitoring system's
algorithm 'learns' over time, and fully charging your machine helps it to more
accurately calculate and display remaining run time.
3-4.5hrs
Connect to the charger either directly or in
the docking station.
The blue LEDs on either side of the battery
will flash during charging.
When the battery is charged, both LEDs will
light for 5 seconds.
Emptying your clear bin
2

Changing your battery

Where you have additional batteries, we recommend that you
alternate the batteries to maintain even performance.
Your battery is fully
To remove a battery
charged when the Hold your hand under the
display shows 100%. battery to support it.
Battery empty and Press the battery release
needs charging. button and slide the battery
Your machine won't off the handle.
operate if the ambient Place the battery on charge.
temperature is below
0°C (32°F). This is
designed to protect
both the motor and
battery.
3
clik
Be careful not to pull
the power trigger while
the clear bin is open
for emptying.
clik
To install a battery
Slide the battery onto the
handle until it clicks securely
in place.
1
4
clik
To close the clear bin, push the bin base upwards
until the clear bin and bin base click into place.
7