Fcc Compliance Statement - Algo 8188 User Manual

Relay Input Current
Draw Detection
Thresholds:
Environmental &
Mechanical:
Compliance:

FCC Compliance Statement

This equipment has been tested and found to comply with the limits for a Class A digital de-
vice, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference when the equipment is operated in a commercial envi-
ronment. This equipment generates, uses, and can radiate radio frequency energy, and if it is
not installed and used in accordance with the instruction manual, it may cause harmful inter-
ference to radio communications. Operation of this equipment in a residential area is likely to
cause harmful interference, in which case the user will be required to correct the interference
at his own expense.
Document 90-00069A
2020/4/15
Page 63
Normally Open
Normally Open with Supervision
Normally Closed
Normally Closed with supervision 4-20mA >20mA
Nominal 12V source, current limited to 40mA
Typical supervision resistor value = 1k ohm
Environmental: 0 to + 40 °C (32 to 104 °F); 10-95% RH,
non-condensing. Dry indoor locations only.
Dimensions (Product): 8" (20.5cm) diameter without trim ring
9.8" (24.9cm) with trim ring, Total height 6.9" (17.5cm)
Blind mounts into 8" hole. Clearance requirement of 5.5"
(14.0cm) above ½" (1.27cm) gypsum board ceiling
Weight (Product): 4.5 lbs (2.0 kg)
Weight (Shipping): 6.1 lbs (2.7 kg)
RoHS, CE, FCC Class A, CISPR 22 Class A, CISPR 24,
CSA/UL (USA & Canada), UL2043, EN60950
Algo Communication Products Ltd
4500 Beedie St Burnaby BC Canada V5J 5L2
www.algosolutions.com
8188 SIP Ceiling Speaker (FW 1.7)
Active Idle Tamper
>4mA <4mA N/A
>20mA 4-20mA <4mA
<4mA >4mA N/A
<4mA
(604) 454-3792
support@algosolutions.com