Advanced Settings Tab - Advanced Multicast - Algo 8188 User Manual

Advanced Settings Tab – Advanced Multicast
Note: The settings on this tab are only visible when in master or slave multicast mode.
The default prepopulated multicast addresses above will work in most cases and should
only be altered for rare cases.
Audio Sync (Slave Mode)
When using multicast with other third-party devices that have a delay in their audio path,
the audio on the 8188 may be heard slightly earlier than on these other devices. By
adding audio delay up to one second, the 8188 may be synchronized with other speakers
or telephones that have greater latency. This feature applies to Multicast Slave mode only.
Master Output Codec (Master Mode)
Audio encoding format used by the Master device when sending output to the slaves.
Document 90-00069A
2020/4/15
Page 58
Algo Communication Products Ltd
4500 Beedie St Burnaby BC Canada V5J 5L2
www.algosolutions.com
8188 SIP Ceiling Speaker (FW 1.7)
(604) 454-3792
support@algosolutions.com