Basic Settings Tab - Multicast (Master Settings) - Algo 8188 User Manual

Basic Settings Tab – Multicast (Master Settings)
Note: See (Advanced Settings > Advanced Multicast) section for more information on
populated IP values.
Multicast Mode (Master/Sender Selected)
If master mode is enabled the 8188 SIP Ceiling Speaker will broadcast an IP stream when
activated in addition to playing the audio over its own speaker. (Note that the 8188 cannot
be both a multicast Master and Slave simultaneously).
Number of Zones
Select "basic" zones if configuring nine or fewer multicast zones or "expanded" to config-
ure up to 50 zones. The expanded zones have the same behaviour as the basic Slave
zones, but are hidden by default to simplify the interface.
Multicast Type
The 8188 SIP Ceiling Speaker may broadcast multicast paging, compatible with Polycom
"on premise group paging" protocol and most multicast-enabled phones that use RTP
audio packets.
Select "Regular" if solely multicasting to Algo SIP endpoints and/or multicast-enabled
phones.
Document 90-00069A
2020/4/15
Page 31
Algo Communication Products Ltd
4500 Beedie St Burnaby BC Canada V5J 5L2
www.algosolutions.com
8188 SIP Ceiling Speaker (FW 1.7)
(604) 454-3792
support@algosolutions.com