Proper Mounting - Siemens SITRANS VP300 Operating Instructions Manual

Note
Removing the protective foil
Remove the protective foil from the pneumatic connections before mounting the positioner.
4.1.1

Proper mounting

CAUTION
Incorrect mounting
The device can be damaged, destroyed or its functionality impaired through improper
mounting.
 Before installing ensure there is no visible damage present on the device.
 Make sure that process connectors are clean, and suitable gaskets and glands are
 Mount the device using suitable tools. Refer to the information in Chapter "Technical
NOTICE
Loss of degree of protection
Damage to device if the enclosure is open or not properly closed. The degree of protection
specified on the nameplate or in Chapter "Technical data (Page 155)" is no longer
guaranteed.
 Make sure that the device is securely closed.
SITRANS VP300 with or without HART
Operating Instructions, 03/2011, A5E01258666-03
used.
data (Page 155)", for example installation torques requirements.
Installing/mounting
4.1 Fundamental safety instructions
29