Commissioning - Siemens SIPART Series Operating Instructions Manual

Commissioning

Risk of crushing through lever of position detection
When the positioner is commissioned, immediate movement of the valve may occur.
If the positioner is in "NO INIT" mode, the movement of the valve starts immediately as soon
as you press the left button on the positioner.
Danger of crushing and shearing with mounting kits which use a lever for position detection.
During commissioning and during ongoing operation, severing or squeezing of limbs could
occur as a result of the lever. Risk of injury when working on control valves due to the high
operating force of the pneumatic actuator.
● Do not reach into the range of motion of the lever following mounting of the positioner and
SIPART PS100
Operating Instructions, 10/2018, A5E45863537.-AA
WARNING
mounting kit.
6
23