Ricoh D1 Operating Instructions Manual
  1. Manuals
  2. Brands
  3. Ricoh Manuals
  4. Printer Accessories
  5. D1
  6. Operating instructions manual
Ricoh D1 Operating Instructions Manual

Ricoh D1 Operating Instructions Manual

Printer unit nic
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Operating
Instructions
Before Use
Printer Driver Installation
Basic Setup
FS-Monitor
Other Print Settings
Setting Functions
Software Uninstallation
Specifications
Read this manual carefully before you use this product and keep it
handy for future reference.

Advertisement

Table of Contents
loading

Related Manuals for Ricoh D1

Summary of Contents for Ricoh D1

  • Page 1 Operating Before Use Instructions Printer Driver Installation Basic Setup FS-Monitor Other Print Settings Setting Functions Software Uninstallation Specifications Read this manual carefully before you use this product and keep it handy for future reference.

  • Page 3: Introduction

    Introduction This manual contains detailed instructions and notes on the operation and use of this machine. For your safety and benefi t, read this manual carefully before using the machine. Keep this manual in a handy place for quick reference. Legal Prohibition Do not copy or print any item for which reproduction is prohibited by law.
  • Page 4 Pictorial Symbols and Other Notations Used in This Manual In this manual, important items are described using symbols. Please be sure to read the descriptions marked with the followings. Each symbol and notation means as below. : Introduces instructions for correct operation of the device. IMPORTANT If these instructions are ignored, the device may not be able to operate at optimum performance or may break down.

  • Page 5: Installation

    Installation The following chapters describe the installation procedure. Connect the device to the network as appropriate to your environment. Your printer can be used as a network printer. Refer to the related chapters to proceed the installation. Basic Setting (recommended) Connecting Connecting to the printer and network.

  • Page 6: Installation And Setup (For Administrators)

    Installation and Setup (for administrators) The following chapters describe installation and setup procedure. Connecting Connecting to the printer and network. Chap.1 Setup 1 Setting the printer. Chap.5 Setup 2 Installing the FS-Monitor. Chap.4 Setup (for clients) The following chapters describe installation and setup procedure. Setup 1 Installing the printer driver.

  • Page 7: Table Of Contents

    Setup (for clients) ..................iv Advanced Setup/Setting Change/Managing ..........iv Chapter 1 Before Use Printer Unit (NIC) Type D1 ................2 Part Names and Their Functions .............. 2 Setup Software ................... 3 Main Menu ....................4 Print Server Setup ..................5 Utility ......................
  • Page 8 Windows 7/Windows 8/Windows 8.1/Windows 10 ........86 Windows Vista ..................90 Chapter 8 Specifi cations Printer Unit (NIC) Type D1 Hardware Specifi cations ......94 Printer Unit (NIC) Type D1 Software Specifi cations ......95 Printer Driver Requirements ..............96...
  • Page 9 Chapter Before Use This chapter describes system requirements, overview of this device and connecting procedures. Printer Unit (NIC) Type D1 ..................2 Part Names and Their Functions ............... 2 Setup Software ...................... 3 Main Menu ......................4 Print Server Setup ....................5 Utility ........................

  • Page 10: Printer Unit (Nic) Type D1

    Printer Unit (NIC) Type D1 Part Names and Their Functions NAME FUNCTIONS Accepts the network cable.(10BASE-T/100BASE-TX/1000BASE-T Network port auto recognition) *category 5 or above for 100BASE-TX. category 5e or above for 1000BASE-T. POWER LED Lights up when the power is turned on. (yellow) Indicates transmission status of network port.

  • Page 11: Setup Software

    Setup Software The following describes the setup software, which contains setup tools, general utility and the manual. This can be used in Windows. IMPORTANT • If you are using Windows 8 or later version: when you run the installer that has been downloaded from the Website, a Windows SmartScreen message may appear.

  • Page 12: Main Menu

    Setup Software Main Menu The following is the fi rst screen. Select setup tools contained in this disk from this screen. • Operating Instructions Open the manual in PDF format. • Printer Driver Install Install the printer driver. • Print Server Setup Install setup tools (quick setup, advanced setup) and general client software (FS-Print).

  • Page 13: Print Server Setup

    Setup Software Print Server Setup Select [Print Server Setup] in the menu, the following screen appears. Select the desired setup. • Quick Setup (recommended for the initial installation) The wizard helps you for initial installation. You can also install FS-Print after the initial installation.

  • Page 14: Utility

    Setup Software Utility Select to install software separately. The screen below appears by selecting [Software Installation] in the menu. REFERENCE The CD-ROM that came with this product is common Setup CD of the Digital Duplicator option. This section describes essential software only in this product. •...

  • Page 15: Connecting Procedure

    Connecting Procedure Items to ready • Ethernet hub • Network Cable IMPORTANT • The device requires the Ethernet hub and the network cable (category 5 or above), which support 100BASE-TX. • The device requires the Ethernet hub and the network cable (category 5e or above), which support 1000BASE-T.

  • Page 16: Resetting To Default

    Resetting to Default Turn on the Printer Unit (NIC) Type D1 while holding down the reset button. Keep holding down the reset button. initialization to factory default will start. When initialization has been completed, the LINK LED fl ashes in green.

  • Page 17: Chapter 2 Printer Driver Installation

    Chapter Printer Driver Installation This chapter describes how to install the printer driver to computers. Printer Driver Installation ..................10...

  • Page 18: Printer Driver Installation

    Printer Driver Installation IMPORTANT • Delete the printer driver for the Digital Duplicator if installed. (“Software Uninstallation” → see p.85) • Administrator rights are required to sign in for installation, deleting and setting change of the printer driver. • If operating system allows multiple users on one computer, make sure that no other user but you is signed in.
  • Page 19 Printer Driver Installation IMPORTANT • The following steps use Windows 10 screenshots. If you are using another Windows operatin system, the screenshots vary. Click [Printer Driver Install] in the main menu]. (“Setup Software” → see p.3) User account control message may appear while installation is in progress.
  • Page 20 Printer Driver Installation Read the SOFTWARE LICENSE AGREEMENT. Select [I agree] and click [Next]. Select the language to be used, and click the [Next] button. Select [LAN Cable]. Click [Next]. Select your printer. Click [Next].
  • Page 21 Printer Driver Installation Select the port to be connected to the Digital Duplicator. The port for this product will be created later. For now, select [LPT1:(Local Port)] and click [Next]. REFERENCE If you are using this product and reinstall the printer driver for upgrade, the setup of this product and creating network port have been completed.
  • Page 23 Chapter Basic Setup This chapter describes the procedures for setting up using FS-Print and for printing process. Basic Setup Steps ....................16 Easy Setup Using Quick Setup ................17 Installing FS-Print ....................20 Adding a Printer Port ................... 23 Confi guring a Printer Driver ................. 26...

  • Page 24: Basic Setup Steps

    Basic Setup Steps Follow the procedure below to print with TCP/IP. REFERENCE • Install the printer driver into your computer prior to setting up the device. • Administrator rights are required to sign in to the computer. • If operating system allows multiple users on one computer, make sure that no other user but you is signed in.

  • Page 25: Easy Setup Using Quick Setup

    Easy Setup Using Quick Setup You can easily setup the IP address of this product using Quick Setup. Select [Quick Setup] at the initial installation. If you have already completed the IP address setting, go on to the next step. If you need advanced setup, use AdminManager.
  • Page 26 Easy Setup Using Quick Setup Read the SOFTWARE LICENSE AGREEMENT. Click [Yes]. Select the print server. Select the device and click [Next]. REFERENCE If the device is not in the search result overview, click [Search]. The device can also be selected by entering Ethernet address directly.
  • Page 27 Easy Setup Using Quick Setup The setup is complete. Select [Yes] and then click [Finish]. REFERENCE Install FS-Print in succession. This allows direct printing from Windows.

  • Page 28: Installing Fs-Print

    Installing FS-Print You can use the supplied FS-Print to print directly via TCP/IP using the device. The FS-Print is a print client sofoware LPR (for Digital Duplicators) is included. After installing, Add Printer Port Wizard starts. The following steps use Windows 10 screenshots. REFERENCE •...
  • Page 29 Installing FS-Print Read the SOFTWARE LICENSE AGREEMENT. Click [Yes]. Specify the folder to install the program. Click [Next]. REFERENCE • Click [Reference] to select the folder to install. Enter the group name shown in the start menu. Click [Next]. Start the installation. Click [Start].
  • Page 30 Installing FS-Print Install is complete. Select [Yes] and click [Finish].

  • Page 31: Adding A Printer Port

    (A) Installing after FS-Print installation Select [Yes] and click [Finish]. (B) Adding from [Add FS-Print Port]. Click [Start] - [All Apps] - [RICOH DD], and then click [Add FS-Print Port]. REFERENCE • In the case of Windows 8/8.1, move to the Apps view from the Start screen and click the [Add FS-Print Port] icon.
  • Page 32 Adding a Printer Port Click [Searching Print Server]. Select the device from the print server list. Click [OK]. Click [Next]. Enter the printer port name. Use the default name when not specifying the name. Click [Next]. Check the settings. Click [Finish].
  • Page 33 Adding a Printer Port Select the printer from the list. Click [Next]. End the port setting. Click [Finish].

  • Page 34: Confi Guring A Printer Driver

    Confi guring a Printer Driver The following describes how to confi gure the printer driver. IMPORTANT • The following error message may appear if the printer driver was installed without using the supplied CD-ROM. Select [Cancel] to follow the instruction below. Click [Start] and click [Devices and Printers].
  • Page 35 Confi guring a Printer Driver Set the bidirectional support. Untick [Enable bidirectional support]. The setting is complete. Click [OK].
  • Page 37 Chapter FS-Monitor This chapter describes the installation and use of popup status monitor, "FS-Monitor". FS-Monitor ......................30 Installation ......................31 Activating FS-Monitor ..................34 Setting FS-Monitor ....................35 Function of FS-Monitor ..................36 Printer Information ................... 36 Status Message ....................36 Printer Name ....................

  • Page 38: Fs-Monitor

    FS-Monitor This monitor shows you the printer status on the screen. It resides on the desktop to present the printer status in real time.

  • Page 39: Installation

    Installation IMPORTANT • The following steps use Windows 10 screenshots. If you are using another Windows operating system, the screenshots vary. Click [Utility] from the Main Menu (“Setup Software” → p.3 ). Click [FS-Monitor]. If [User account control] appears, click [Yes]. When entering password, enter password of administrator account and click [Yes].
  • Page 40 Installation Read the Software License Agreement. Click [Yes]. Select the folder for installation. Click [Next]. REFERENCE • You can select the folder for installation by clicking [Reference]. Enter a group name to display in the start menu. Click [Next]. Click [Start] to begin installation.
  • Page 41 Installation A prompting screen to register Printer Unit (NIC) Type D1 in the exceptions list of Windows Firewall appears. Click [Yes] and register Printer Unit (NIC) Type D1 in the exceptions list. Installation is complete. Click [Finish].

  • Page 42: Activating Fs-Monitor

    Activating FS-Monitor ●Windows 10 Click [start] - [All Apps] - [RICOH DD (or the group name you select)] - [FS-Monitor] to activate FS-Monitor. ●Windows 8/Windows 8.1 Move to the Apps view from the Start screen and click the [FS-Monitor] icon to activate FS-Monitor.

  • Page 43: Setting Fs-Monitor

    Setting FS-Monitor This section describes the setting procedures when running FS-Monitor for the fi rst time, and changing the printer which is monitored by the FS-Monitor. Click [Tools] and click [Options]. Select the printer to be monitored by using the [Status Monitoring] tab, and click [OK].

  • Page 44: Function Of Fs-Monitor

    Function of FS-Monitor Printer Information The printer status is displayed. Status Message The status of the connected printer is displayed. Status Message Ready Ready. Master Making Master Making. Printing Printing. Offl ine Offl ine The power of Digital Duplicator is not ON. Turn on the power of Power Off Digital Duplicator.

  • Page 45: Printer Name

    Function of FS-Monitor Printer Name The name and IP address of the connected printer are displayed. Menu Structure Menu Item Description Always keeps the window in the foreground. The Always display in front window may be hidden behind depending on settings of other programs.

  • Page 46: Options Dialog

    Options Dialog It is possible to modify settings for FS-Monitor. Click [Options] to display the [Options] screen. Status Monitoring • Printer list Displays the list of printers connected to the network. Select one for status monitoring. • Status refresh timing Sets the interval for refreshing the printer status.

  • Page 47: Display

    Options dialog Display • Available Events List of events available with "FS-Monitor". • Selected Events List of selected events to be displayed in. If a printer event corresponds to one of them, "FS- Monitor" appears. • Adds items of "Available Events" to "Selected Events". •...
  • Page 49 Chapter Other Print Settings There are various print settings in Printer Unit (NIC) Type D1. This chapter describes the procedures of print settings other than basic settings. Various Print Settings ..................42 Printing with LPR Port ..................43 Printing with Standard TCP/IP ................48 Printing with IPP Port ...................

  • Page 50: Various Print Settings

    Various Print Settings There are various print settings in Printer Unit (NIC) Type D1. Please select appropriate print settings for your use. Print method Reference page Printing with FS-Print P.20 Printing with LPR port P.43 Printing with Standard TCP/IP P.48 Printing with IPP port P.53...

  • Page 51: Printing With Lpr Port

    Printing with LPR Port Printing with OS print client (LPR port) instead of using FS-Print IMPORTANT • To install the printer driver, you must sign in as a user with administrator rights. • If multiple users are allowed on one computer at the same time, please be sure that only one user is signed in.
  • Page 52 Printing with LPR Port Click [Programs] and [Turn Windows features on or off]. [Windows Features] appears. • Windows 7/Windows 8/Windows 8.1/Windows 10 Select [Print and Document Services] - [LPR Port Monitor] and click [OK]. Click [Close]. • Windows Vista Select [Printing Services] - [LPR Port Monitor] and click [OK].
  • Page 53 Printing with LPR Port ●Add the Printer Click [Start] and click [Control Panel], then click [Hardware and Sound] and [Advanced printer setup] or [Add a Printer]. Add a local printer. • Windows 8/Windows 8.1/Windows 10 Click [The printer that I want isn’t listed]. Select [Add a local printer or network printer with manual settings] and click [next].
  • Page 54 Printing with LPR Port Add a LPR compatible printer. Enter IP address and ‘ip’, and click [OK]. Select a printer driver. Click [Next]. REFERENCE • Click [Have Disk] to install using the printer driver disk supplied with the printer. • For the installation, refer to the printer driver manual supplied with the printer.
  • Page 55 Printing with LPR Port If the printing is successful, the setting is complete.

  • Page 56: Printing With Standard Tcp/Ip

    Printing with Standard TCP/IP Printing with OS print client (Standard TCP/IP) instead of using FS-Print IMPORTANT • To install the printer driver, you must sign in as a user with administrator rights. • If multiple users are allowed on one computer at the same time, please be sure that only one user is signed in.
  • Page 57 Printing with Standard TCP/IP Click [Hardware and Sound] and [Advanced printer setup] or [Add a Printer]. Add a local printer. • Windows 8/Windows 8.1/Windows 10 Click [The printer that I want isn’t listed]. Select [Add a local printer or network printer with manual settings] and click [next].
  • Page 58 Printing with Standard TCP/IP Add a printer port. Select [TCP/IP Device] for the device type. Enter the IP address assigned to the device for the Hostname or IP address. Use the default (xxx.xxx. xxx.xxx) when not using a specifi c name. Click [Next].
  • Page 59 Printing with Standard TCP/IP (B)Using in the LPR mode Check [LPR] for the protocol, enter 'ip' for the queue, check the [LPR Byte Counting Enabled], and then click [OK]. Click [Next]. Select a printer driver. Click [Next]. REFERENCE • Click [Have Disk] to install using the printer driver disk supplied with the printer. •...
  • Page 60 Printing with Standard TCP/IP Check the printer driver. Select [Use the driver that is currently installed (recommended)] or [Replace the current driver], and click [Next]. REFERENCE • If you installed a new driver separately, select [Replace the current driver]. Register a printer name. If you are not using a specifi...

  • Page 61: Printing With Ipp Port

    Printing with IPP Port This section describes the printing procedures of using IPP port. IMPORTANT • To install the printer driver, you must sign in as a user with administrator rights. • If multiple users are allowed on one computer at the same time, please be sure that only one user is signed in.
  • Page 62 Printing with IPP Port Add a local printer. • Windows 8/Windows 8.1/Windows 10 Click [The printer that I want isn’t listed]. • Windows Vista/Windows 7 Click [Start] and click [Control Panel], then click [Hardware and Sound] and the [Add a Printer] icon.
  • Page 63 Printing with IPP Port Select a printer driver. Click [OK]. REFERENCE • Click [Have Disk] to install using the printer driver disk supplied with the printer. • For the installation, refer to the printer driver manual supplied with the printer. Click [Next].

  • Page 64: Printing With Netbios Over Tcp/Ip

    Printing with NetBIOS over TCP/IP Follow the procedure below to print with NetBIOS over TCP/IP. IMPORTANT • To install the printer driver, you must sign in as a user with administrator rights. • If multiple users are allowed on one computer at the same time, please be sure that only one user is signed in.
  • Page 65 Printing with NetBIOS over TCP/IP Click [Network], then Double-click the computer icon (the device). Double-click the [prn1] Printer icon. The message below appears. Click [OK]. Add Printer Wizard starts. Follow the guide to set it up. Printer is successfully added when the printer test page is printed.

  • Page 66: Netbios Over Tcp/Ip

    NetBIOS over TCP/IP Workgroup Structure of NetBIOS over TCP/IP About the workgroup structure of NetBIOS over TCP/IP. (Example) Ethernet address of the device: 00:80:92:4A:69:7C 1. Computer Name[\\FS-100U2-4A697C] A computer name of a print server can be changed arbitrarily. (“Setting Functions” → see p.63)
  • Page 67 NetBIOS over TCP/IP 1. Printer icon [\\FS-100U2-4A697C\prn1] 2. Report Folder [\\FS-100U2-4A697C\report] 3 .Setting Folder [\\FS-100U2-4A697C\setup]...
  • Page 68 NetBIOS over TCP/IP 1. Setting report (Read only) [\\FS-100U2-4A697C\report\Confi gReport.txt] Outputs the internal information of when the device is started. 2. Diagnostic report (Read only) [\\FS-100U2-4A697C\report\HardReport.txt] 3. System status report (Read only) [\\FS-100U2-4A697C\report\Status.txt] Outputs the status of when the device is stated.
  • Page 69 NetBIOS over TCP/IP 1. Initial setting fi le (Read/Write) [\\FS-100U2-4A697C\setup\Confi g.ini] Enter [Workgroup name] and [IP address] in the initializing fi le. Use an editor, such as Notepad, and overwrite the fi le to set it up. After 3 seconds from overwriting, the device performs automatic reset and reboot.
  • Page 71 Chapter Setting Functions This chapter describes the advanced setup using AdminManager and Web browser. Using AdminManager ..................64 Starting AdminManager ................... 64 Searching the Device with AdminManager ............66 IP Address Confi guration ................. 66 AdminManager Functions ..................67 AdminManager Menu ..................67 Setting with AdminManager .................

  • Page 72: Using Adminmanager

    Using AdminManager [AdminManager] allows advanced and setting change. Remote reboot and Printer status monitor are accessible functions. IMPORTANT • TCP/IP or IPX/SPX protocols should be installed in advance. • The following steps use Windows 10 screenshots. If you are using another Windows operating system, the screenshots vary.
  • Page 73 Using AdminManager Read SOFTWARE LICENSE AGREEMENT. Click [Yes]. A prompting screen to register Printer Unit (NIC) Type D1 in the exceptions list of Windows Firewall appears. Click [Yes] and register Printer Unit (NIC) Type D1 in the exceptions list. AdminManager starts.

  • Page 74: Searching The Device With Adminmanager

    Using AdminManager Searching the Device with AdminManager Confi rm that AdminManager recognizes the device prior to the setup. If the device is not recognized, review the attaching procedure. (“Connecting Procedure” → see p.7) If it is not still displayed, reset the device to factory default.(“Resetting to Default” → see p.8) IP Address Confi...

  • Page 75: Adminmanager Functions

    AdminManager Functions AdminManager Menu Menu Item Description Search Searches this device on the network. File Exit Exits AdminManager. System Status Shows the system status monitor. Status Confi guration Summary Shows the confi guration summary. Print Server Confi guration Various settings Confi...
  • Page 76 AdminManager Functions System status The system status is displayed in real time. You can save the system status to the log fi le and use it as a reference. The update time can be set from [Option] - [Environment setting] in the menu. Confi...

  • Page 77: Setting With Adminmanager

    Setting with AdminManager Print Server Setup Change the settings or the advanced settings from [Confi guration] - [Print Server Confi guration]. Select the device and select [Confi guration] - [Print Server Confi guration] from the menu. REFERENCE • If the password is required, the Password Input screen appears.

  • Page 78: General

    Setting with AdminManager General Item Details Default Sets the password in ASCII strings (within 7 characters). Root Password This is used as Authentication password for AdminManager None and Web. Change Root Changes the password. Password Sets the physical network type. Use in AUTO normally. If LAN Interface LINK lamp on the hub does not light, change the setting to AUTO...

  • Page 79: Tcp/Ip

    Setting with AdminManager TCP/IP Item Details Default Use TCP/IP Enables TCP/IP protocol. ENABLE Protocol Enables DHCP/BOOTP protocol. Toggle between DHCP Use DHCP/BOOTP ENABLE and BOOTP automatically and obtains an IP address. Use RARP Enables RARP protocol. ENABLE IP Address Sets the IP address in the form “xxx.xxx.xxx.xxx“ (decimal). 0.0.0.0 Sets the Subnet Mask in the form “xxx.xxx.xxx.xxx“...
  • Page 80 Setting with AdminManager Item Details Default Sets DNS server (primary) address. Not required if you Primary Server enter POP/SMTP server name (IP address). Enter in the 0.0.0.0 form “xxx.xxx.xxx.xxx“ (decimal). Sets DNS server (secondary) address. Not required if you Secondary set POP/SMTP server name (IP address).

  • Page 81: Netbeui/Netbios

    Setting with AdminManager NetBEUI/NetBIOS Item Details Default Use NetBEUI Enables NetBEUI. ENABLE protocol Use NetBIOS over Enables NetBIOS over TCP/IP protocol. ENABLE TCP/IP protocol FS-100x-xxxxxx Computer Name Sets the computer name. (Ethernet address: last 6 digits) Sets the work group. New names are not recognized if Work Group WORKGROUP not existing on the network.

  • Page 82: Snmp

    Setting with AdminManager SNMP Item Details Default Authentic Sets Authentic community name. This is used when public community accepting the SNMP Set Request. Trap Community Sets Trap community. Used when Trap is sent. public Trap Destination Sets Trap Destination Address. Enter the address in doted 0.0.0.0 Address decimal notation “xxx.xxx.xxx.xxx ".

  • Page 83: Smtp

    Setting with AdminManager SMTP Item Details Default Enables SMTP Protocol. If set to disable, E-mail Use SMTP Protocol DISABLE transmission is canceled. SMTP Server Sets domain name or IP address as host name. DNS None Name server setup is required if domain name is used. Sets the sender address.
  • Page 84 Setting with AdminManager Item Details Default SMTP Port Sets the port number. Use default (25). Number --------------- Print Server XXXXX [00:80:92:XX:XX:XX] Sets the text, which is attached to the end of Signature --------------- the messages. (Device name and the last 6 digits of the Ethernet address.)

  • Page 85: Setting Via Web Browser

    Setting via Web Browser You can use Web browser for advanced setting and setting change. Remote restart and Printer status monitor are accessible functions. IMPORTANT • You should enable TCP/IP protocol and set the IP address in advance. • Display may vary depending on the browser. REFERENCE •...
  • Page 86 Setting via Web Browser Opening the Web page from Web browser Enter the IP address in Web browser. Example: When IP address is 192.168.0.221 http://192.168.0.221/...

  • Page 87: Setting From The Web Page

    Setting via Web Browser Setting from the Web Page Click the desired item to open the setup screen. Enter values. Setting from the Web page Item Description Printer Status Shows printer status. Display Status System Status Shows system status. Print Server Various settings E-Mail (send) Sets E-Mail (send).

  • Page 88: Web Browser Setup Items

    Web Browser Setup Items General Item Details Default Web browser Change root Sets the password in ASCII strings (within 7 Password characters). This is used as Authentication None password for AdminManager and Web. LAN Interface Sets the physical network type. Use in AUTO normally.
  • Page 89 Web Browser Setup Items Item Details Default Web browser Primary Server Sets DNS server (primary) address. Not required if you set POP/SMTP server name (IP address). 0.0.0.0 Enter in the form “xxx.xxx.xxx.xxx“ (decimal). Secondary Server Sets DNS server (secondary) address. Not required if you set POP/SMTP server name (IP 0.0.0.0 address).

  • Page 90: Netbeui/ Netbios

    Web Browser Setup Items NetBEUI/ NetBIOS Item Details Default Web browser NetBEUI Enables NetBEUI. ENABLE Protocol NetBIOS over TCP Enables NetBIOS over TCP/IP protocol. ENABLE Computer Name Sets the computer name. FS-100x-xxxxxx (Ethernet address: last 6 digits) Workgroup Sets the work group. New names are not WORKGROUP recognized if not existing on the network.

  • Page 91: Snmp

    Web Browser Setup Items SNMP Item Details Default Web browser Authentic Sets Authentic community name. This is used public Community when accepting the SNMP Set Request. Trap Community Sets Trap community. Used when Trap is sent. public Trap Address(IP) Sets Trap Destination Address. Enter the address in dotted decimal notation "xxx.xxx.xxx.xxx".

  • Page 92: E-Mail Transmission (Smtp)

    Web Browser Setup Items E-Mail transmission (SMTP) Item Details Default Web browser SMTP Protocol Enables SMTP Protocol. If set to disable, E-mail DISABLE transmission is canceled. SMTP Server Name Sets domain name or IP address as host name. DNS Server setup is required if domain name is None used.

  • Page 93: Chapter 7 Software Uninstallation

    Chapter Software Uninstallation This chapter describes the uninstallation procedure for the Printer Driver on computers. Uninstalling the Printer Driver ................86 Windows 7/Windows 8/Windows 8.1/Windows 10 ........... 86 Windows Vista ....................90...

  • Page 94: Uninstalling The Printer Driver

    Uninstalling the Printer Driver The following describes the procedure for uninstalling the printer driver. Windows 7/Windows 8/Windows 8.1/Windows 10 IMPORTANT • If you are requested to enter password of administrator account during uninstallation of the printer driver, enter the password of the user with administrative rights shown. Open [Control Panel].
  • Page 95 Uninstalling the Printer Driver Click [View devices and printers] under the [Hardware and Sound] menu. Select and right-click the Digital Duplicator. Then click [Remove device] from the menu. The [Remove Device] dialog box appears. Click the [Yes] button. Click [Print server properties]. * When not displayed, click other printer icon.
  • Page 96 Uninstalling the Printer Driver Click the [Drivers] tab in the [Print Server Properties] dialog box. Click the [Change Driver Settings] button. Select Digital Duplicator and click the [Remove] button. The [Remove Driver And Package] dialog box appears. Select [Remove driver and driver package] and click the [OK] button.
  • Page 97 Uninstalling the Printer Driver The [Print Server Properties] dialog box appears. Click the [Yes] button. The [Remove Driver Package] dialog box appears. Click the [Delete] button. Once the message [Driver package deleted.] appears, uninstallation of the printer driver is complete. Click the [OK] button.

  • Page 98: Windows Vista

    Uninstalling the Printer Driver Windows Vista IMPORTANT • If you are requested to enter password of administrator account during uninstallation of the printer driver on Windows Vista, enter the password of the user with administrative rights shown. Click the [Start] button on the task bar and click [Control Panel] on the menu.
  • Page 99 Uninstalling the Printer Driver The [Printers] dialog box appears. Click the [Yes] button. * If the Digital Duplicator is set to [The default printer], a message that the default device has been changed will appear. Confi rm the message and click [Close]. Select [File] - [Run as administrator] - [Server Properties] from the menu bar.
  • Page 100 Uninstalling the Printer Driver The [Remove Driver And Package] dialog box appears. Select [Remove driver and driver package] and click the [OK] button. The [Print Server Properties] dialog box appears. Click the [Yes] button. The [Remove Driver Package] dialog box appears. Click the [Delete] button.

  • Page 101: Chapter 8 Specifi Cations

    Chapter Specifi cations This chapter lists the specifi cations of Printer Unit (NIC) Type D1. Printer Unit (NIC) Type D1 Hardware Specifi cations ........... 94 Printer Unit (NIC) Type D1 Software Specifi cations ..........95 Printer Driver Requirements ................96...

  • Page 102: Printer Unit (Nic) Type D1 Hardware Specifi Cations

    Printer interface USB 2.0 Hi-Speed (type A): 2 ports Power source DC5V AC adoptor supplied with Printer Unit (NIC) Type D1 (AC 100 V, 50/60 Hz) Max. power consumption 2.5 W (DC 5 V 0.5 A), Excluding USB bus power...

  • Page 103: Printer Unit (Nic) Type D1 Software Specifi Cations

    Printer Unit (NIC) Type D1 Software Specifi cations Compatible protocol • TCP/IP Raw(9100) Port, LPD, FTP, IPP, HTTP, TELNET, DHCP, BOOTP, SNMP, SMTP, DNS, DDNS, WINS, TCP, UDP, ARP, RARP, IP, ICMP, NetBIOS over TCP Compatible OS Windows Vista (32bit/64bit)

  • Page 104: Printer Driver Requirements

    Printer Driver Requirements Operating System Windows Vista (32bit/64bit) Windows 7 (32bit/64bit) Windows 8(32bit/64bit) *1 Windows 8.1(32bit/64bit) *1 Windows 10(32bit/64bit) *1 *1 desktop apps only...
  • Page 105 © 2016...
  • Page 106 C6A0-8611...

Table of Contents