7. Carefully set the door back into place. Ensure
the door is aligned horizontally and vertically so
that the seals are closed on all sides before
finally tightening the top hinge.
Insert the hinge back and screw it to the
top of the appliance.
9. Put the top cover back and fix it in place with
the screws.
TIPS FOR SAVING ENERGY
For the most energy efficient use of your appliance:
Ensure your freezer has adequate ventilation as recommended in the installation instructions.
Allow warm food and drinks to cool down before placing in the appliance.
Keep door openings to a minimum.
Open the appliance as briefly as possible.
Ensure that the freezer door is always closed properly.
OPERATING NOISES
Normal noises
Motors are running.
Refrigerant is flowing through the tubing.
8. Use a spanner to tighten it if necessary.
10. With the door closed, check that the door is
13
aligned horizontally and vertically and that
the seals are closed on all sides before finally
tightening the bottom hinge. Readjust the
levelling feet as required.
GB