Speaker
Table 5-4
Speaker description and part number
Description
Speaker
Before removing the speaker, follow these steps:
1.
Prepare the computer for disassembly
2.
Remove the bottom cover (see
3.
Disconnect the battery (see
Remove the speaker:
1.
Disconnect the speaker cable from the system board (1).
2.
Remove the four Phillips M2.0 × 4.8 screws (2) that secure the speakers to the computer.
3.
Remove the speakers (3) while removing the cable from the routing along the bottom of the battery.
Reverse this procedure to install the speakers.
26
Chapter 5 Removal and replacement procedures for authorized service provider parts
(Preparation for disassembly on page
Bottom cover on page
Battery on page
23).
20).
21).
Spare part number
L91528-001